#Cr10s motherboard and other upgrades

1 messages · Page 1 of 1 (latest)

swift pagodaBOT
#
AI Help

For upgrading your CR10s to meet today's standards, I recommend considering the following upgrades, especially for a quieter and improved printing experience:

  1. Motherboard: Upgrade to a silent motherboard like the SKR Mini E3 or the Creality Silent Mainboard. Both of these options offer quieter operation and improved reliability compared to the stock motherboard.

  2. Stepper Motor Dampers: Since you already have some dampers installed, you can consider upgrading to higher-quality dampers like the stealthChop dampers from companies such as FYSETC or WINSINN. These can further reduce motor noise.

  3. Hotend: Since you have a Micro Swiss direct drive extruder with an all-metal hotend, you're already in good shape for print quality. Just make sure to check the PTFE tube for wear and tear and replace it if necessary.

  4. Additional Upgrades: Consider upgrading to a silent fan for the hotend and part cooling to further reduce noise levels. You can also l...

WARNING: This response is AI generated and may contain errors.
swift pagodaBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.