AI Help
It appears that the bumpy texture on your mouse model could be due to underextrusion or inconsistent extrusion. The issue may be related to the settings you are using for infill pattern and density.
Here are a few suggestions to troubleshoot this issue:
- Check your filament diameter settings in the slicer software to ensure it matches the actual filament diameter.
- Make sure the nozzle is not partially clogged. Clean the nozzle thoroughly.
- Increase the extrusion multiplier slightly to see if it improves the texture.
- Check the filament tension and make sure it is not too loose or too tight.
If the issue persists, you may need to adjust your slicer settings further or consider calibrating your extruder.
If you have any more details or images of the issue, feel free to share for a more accurate diagnosis.
tropic depot
oblique bobcat