AI Help
Stringing can be caused by various factors, such as incorrect temperature settings, retraction settings, or filament quality. To troubleshoot this issue, you can try the following steps:
- Check and adjust the temperature settings: Stringing can occur if the temperature is too high. Try lowering the temperature by 5-10 degrees and see if the stringing improves.
- Adjust retraction settings: Increase the retraction distance and speed in your slicer settings to prevent the filament from oozing out during non-printing moves.
- Check filament quality: Poor-quality filament can also contribute to stringing. Try a different brand or batch of filament.
By experimenting with these settings, you should be able to reduce or eliminate the stringing in your prints.
magic niche
latent patio