#A

1 messages · Page 1 of 1 (latest)

cyan pathBOT
#
Could you include more info?

To help you get the best help try to include as much information as you can such as:
• Printer make and model,
• Any Mods,
• Firmware,
• Filament material and temps,
• Slicer,
• Any recent changes,
• What have you tried so far.

Images can really help with debugging a printer! Consider adding some to your post of the print and the printer.

#
AI Help

It sounds like you are dealing with issues related to stringing and poor adhesion between layers. Here are a few suggestions:

  1. Retraction Settings: Adjust your retraction settings to reduce stringing. Increasing the retraction distance and speed can help minimize the amount of material oozing during travel moves.

  2. Print Temperature: Ensure that you are printing at the recommended temperature for the Sunlu PLA+ filament. Sometimes, slightly lowering the temperature can help reduce stringing.

  3. Print Speed: Slowing down the print speed can improve adhesion between layers, especially in areas where the geometry changes rapidly.

  4. Cooling Fan: Make sure that the cooling fan is working properly to help solidify the material quickly, reducing the chances of webbing.

  5. Check for Clogs: Check your nozzle for any clogs that could be affecting the extrusion.

If these suggestions don't solve the issue, feel free to provide more specific details, and we can troubleshoot further.

WARNING: This response is AI generated and may contain errors.
rustic jackal
#

?solved