It sounds like you may be experiencing issues with printing overhangs. Here are a few troubleshooting steps you can try:
Increase fan speed: Cooling the filament quickly can help prevent drooping on overhangs. Make sure your printer's cooling fan is working properly and consider increasing the fan speed in your slicer settings for overhangs.
Decrease print speed: Slowing down the print speed for overhangs can help improve the quality of these areas. Try reducing the print speed specifically for overhang sections in your slicer software.
Adjust temperature: Sometimes printing at a slightly lower temperature can help prevent drooping on overhangs. Experiment with lowering the print temperature slightly to see if it improves overhang printing.
Enable support structures: If the overhang is too steep for your filament to bridge successfully, consider enabling support structures in your slicer settings. These structures can help provide a foundation for the overhang to ...
glad hamlet