ender 3 v2 neo AWFUL layer shifts all of a sudden.

[compact cairn]

AI Help

It sounds like the layer shifting issue you're experiencing could be due to a mechanical issue with the printer. Here are a few troubleshooting steps you can try:

1. Check the belts: Make sure the belts are tight and properly aligned. Loose belts can cause shifting during printing.
2. Check the pulleys and gears: Ensure that the pulleys and gears are secure and not slipping during printing.
3. Check the stepper motor drivers: If the drivers are overheating, they may be causing the layer shifting. Make sure they are properly cooled.
4. Check the print head: Make sure the print head is moving smoothly along the axes without any obstructions.

If you have ruled out mechanical issues and still experience layer shifting, you may want to recalibrate your printer settings in Klipper. Additionally, checking the G-code and slicer settings can also help troubleshoot the issue.

If the issue persists, feel free to provide more details, and I can assist further in troubleshooting.

WARNING: This response is AI generated and may contain errors.

[lapis summit]

I have attempted to use multiple files, the benchy attached is a known good gcode file as it has printed flawlessly before

I have also ensured that all belts are properly tightened

[lapis summit]

something is very wrong

the printer is moving way faster than it should be

despite being on standard slicing settings