AI Help
It seems like your 3D printer's homing position might be misaligned. Here are a few steps you can try to fix the issue:
-
Check the endstop switches: Ensure that the endstop switches are properly positioned and functioning correctly. They are responsible for triggering the printer to stop moving when homing.
-
Calibrate the bed level: Make sure your printer's bed is properly leveled. A misleveled bed can cause the nozzle to hit the frame during auto homing. Consult your printer's manual or look for bed leveling guides specific to your printer model.
-
Adjust endstop position: If the issue persists, you may need to physically adjust the position of the endstop that triggers the nozzle to stop. Typically, these switches have adjustment screws to fine-tune their position. Check your printer's documentation to locate and adjust them.
Remember, these suggestions are general troubleshooting steps as I do not have specific information about your printer model. It is always recommend...
vale drift
meager fulcrum