It sounds like you're experiencing some difficulties with your 3D printer. Before jumping to the conclusion that it's bricked, let's troubleshoot and see if we can resolve the issue. Here are a few steps you can try:
Double-check the slicing software: Ensure that you're using the correct slicing software for your printer model and that it's properly configured. Make sure you're exporting the sliced file in a format supported by your printer (such as .STL or .OBJ).
Check the firmware compatibility: Verify that the firmware version you updated to is compatible with your specific printer model. Sometimes, using incompatible firmware can cause errors.
Revert to previous firmware: If the issue started after updating the firmware, you can try reverting back to the previous version of the firmware. This might help in resolving any compatibility issues.
Try a different print file: Test with different models and file formats to see if the problem persists. This will help dete...
Below are Firmware files and updates for most EPAX 3D printers. Please be sure you are selecting the correct file for your printer Firmware Installation Instructions 1. Find and download the correct firmware for your machine from the list below. 2. Unzip the compressed file and place the contents on the root director
limpid horizon
lusty bolt
