AI Help
To adapt the original LCD to the new Makerbase MKS TinyBee V1.0 motherboard, you will need to create a custom adapter cable. Since the original LCD has a 14-pin connector and the new motherboard has two 10-pin connectors, some pins will need to be omitted or rearranged. Here's a suggested approach:
-
Identify the pinouts of both the original LCD connector and the new motherboard connectors. You can refer to their respective datasheets or contact the manufacturers for this information.
-
Determine which pins on the original LCD connector correspond to the various LCD functions, such as power, ground, data, control signals, etc. Take note of their positions or pin numbers.
-
Map the functions of the original LCD to the pinouts of the new motherboard connectors. This step requires careful consideration as you'll need to match the correct signals and minimize wiring errors.
-
Create a diagram or layout based on your mapping, indicating which pins from the original LCD connector...
foggy nexus
modern quest