The print doesnt stick to the floor | 3D Printing | Page 1

AI Help

It sounds like you are experiencing an adhesion issue with your Ender 3 S1 Pro. Here are a few things you can try to improve filament adhesion:

Level the bed: Make sure your print bed is properly leveled. Adjust the bed height using the built-in bed leveling feature or manually with a piece of paper. This helps ensure the nozzle is at the correct distance from the bed.
Clean the print surface: Ensure that the print surface is clean and free from any debris or oils that may hinder adhesion. Using isopropyl alcohol can help remove any residue.
Adjust the first layer height: Try increasing the first layer height slightly. This helps the filament adhere better to the bed.
Use a heated bed or adhesive: If you haven't already, consider using a heated bed. Increasing the bed temperature can help filament adherence. You can also try using adhesive substances like hairspray, glue stick, or specialized bed adhesives like PEI sheets or blue painter's tape.
Slow down the fir...

#The print doesnt stick to the floor