AI Help
It sounds like you may be experiencing inconsistent extrusion, which could be causing the small dots of filament. Here are a few possible solutions:
- First, make sure your nozzle is clean and not clogged. Unclog it if necessary.
- Check your filament diameter using a caliper to ensure it matches your software settings. Inconsistent filament thickness can cause extrusion issues.
- Since you recently bought new filament, try using a different brand or batch. Lower quality filament can cause problems like inconsistent extrusion.
- Double-check your printing temperature. PLA usually prints well between 190-220C, so try adjusting the temperature within that range to see if it improves the extrusion quality.
- Check if your printer's nozzle is too close to the bed. This can impede proper filament flow. Adjust the z-offset or bed leveling if needed.
- Check your printer's extruder tension. Make sure it is properly gripping the filament and not slipping.
- Sometimes, the issue can ...
fresh jay