AI Help
Under extrusion on circular patterns can be caused by various factors. Here are a few possible solutions to troubleshoot the issue with your Ender 3 Max Neo:
-
Check your filament: Ensure that your filament is not tangled or causing any drag on the spool. Also, make sure it is correctly loaded and feeding smoothly into the extruder.
-
Check the nozzle: A clogged or partially blocked nozzle can lead to under extrusion. Remove the nozzle and clean it thoroughly using a small wire brush or a specialized cleaning filament. Make sure there is no residual filament blocking the nozzle opening.
-
Filament diameter: Confirm that your printer settings accurately reflect the filament diameter you are using. Incorrect settings may cause under extrusion.
-
Increase the temperature: If under extrusion persists, try increasing the nozzle temperature slightly (in increments of 5°C) to ensure proper melting of the filament.
-
Calibrate the extruder: It's possible that your extruder steps/m...
wicked atlas
red oracle
