#just calibrated esteps, why are they so low?

1 messages · Page 1 of 1 (latest)

dim kettleBOT
#
AI Help

It seems like there might be an issue with your extruder steps per mm settings. To troubleshoot this, you can follow these steps:

  1. Make sure you have the correct firmware settings for your Creality Sprite printer. Check the manufacturer's documentation or website for the specific steps per mm value for your extruder.
  2. Verify that the firmware settings are properly saved and updated on your printer.
  3. If you are using a slicer software, ensure that the filament diameter and extrusion multiplier are correctly set in the slicer settings.
  4. Check the physical hardware of your extruder. Make sure there are no clogs, blockages, or loose parts that may affect the extrusion.
  5. If necessary, you can manually calibrate your extruder steps per mm. There are various guides and tutorials available online that can help you with this process.

If you have followed these troubleshooting steps and are still experiencing issues, you may need to reach out to Creality's technical support for fu...

WARNING: This response is AI generated and may contain errors.