#Skewness on troodon 2.0 corexy printer

1 messages · Page 1 of 1 (latest)

fringe patrolBOT
#
AI Help

If you are experiencing skewness or dimensional accuracy issues in your 3D prints, there are a few potential causes and solutions you can try:

  1. Belt tension: Check if the belts on your printer are properly tensioned. Loose belts can cause inaccuracies in print dimensions. Make sure they are snug but not overly tight.

  2. Pulley tightness: Ensure that the pulleys on the X and Y axis are securely tightened. Loose pulleys can introduce skewness in prints.

  3. Print speed and acceleration: Reducing the print speed and acceleration settings can sometimes help minimize skewness. Experiment with slower speeds to see if it improves dimensional accuracy.

  4. Rigidity: Check if the printer frame and components are firmly secured. Any wobbling or flexing during printing can contribute to skewness. Reinforcing or tightening the frame may help.

  5. Print bed leveling: Ensure that the print bed is accurately leveled. Uneven leveling can cause skewness in prints.

  6. Mechanical issues: Inspect ...

WARNING: This response is AI generated and may contain errors.
signal turret
#

Ive tried tensioning and losening A/B belts but it didnt have impact on the crosses i printed

#

atm my firmware is limited to 3000 acceleration

#

pulleys were all fine

fringe patrolBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.