#anycubic vypper being weird

1 messages · Page 1 of 1 (latest)

shadow ravenBOT
#
AI Help

I'd be happy to help you troubleshoot your 3D printer issues. Let's start by addressing the ghosting and stringing problems. Ghosting typically occurs due to mechanical issues, such as loose belts, worn-out pulleys, or insufficient support structures. Stringing, on the other hand, is often related to improper retraction settings or filament temperature.

Here are a few steps you can take to troubleshoot these issues:

  1. Check the belts: Make sure all belts are properly tensioned and not loose. Tighten them if needed.
  2. Inspect the pulleys: Ensure that the pulleys are firmly secured and not worn out. Replace them if necessary.
  3. Verify the support structures: If you're printing with large overhangs or bridges, ensure that your printer's support structures are properly calibrated and functional.
  4. Adjust retraction settings: Increase the retraction distance and speed in your slicer software to minimize stringing. Experiment with different values to find the best results.
  5. Check...
WARNING: This response is AI generated and may contain errors.