#Importing Gcode to get old values??

1 messages · Page 1 of 1 (latest)

merry jackalBOT
#
AI Help

Yes, it is possible to load a previously successful G-code file into Cura and retrieve the original settings that were used for that print. Follow these steps to accomplish this:

  1. Open Cura and navigate to the "Open File" option.
  2. Choose the previously successful G-code file that you want to retrieve the settings from.
  3. Cura will open the file, and you will see the model and all the associated print settings.
  4. Click on the "Slice" button, and Cura will generate a new G-code file using the settings from the loaded file.
  5. Save the newly generated G-code file and use it for your future prints.

Keep in mind that this method only retrieves the settings from the loaded file, so it won't magically reset any changes you made in Cura. However, it can help you identify and compare the settings used for the successful print with the settings in your current setup. This way, you can manually adjust the settings to match the ones from the successful print and hopefully resolve your p...

WARNING: This response is AI generated and may contain errors.