#Ender 3 pro prints off center

1 messages · Page 1 of 1 (latest)

fierce sandBOT
#
AI Help

If your printer is printing closer towards the bottom edge, it is likely an issue with the bed leveling. Follow these steps to address the problem:

  1. Make sure your printer's bed is clean and free from any debris.
  2. Check if your printer has an automatic bed leveling feature. If yes, activate it and let the printer do the calibration process.
  3. If your printer doesn't have automatic bed leveling, manual leveling is required. Refer to the manufacturer's instructions or user manual to ensure you follow the correct procedure.
  4. Use a piece of paper or a feeler gauge to adjust the gap between the print nozzle and the bed. The nozzle should lightly grip the paper, allowing a small amount of resistance.
  5. Repeat the leveling process for all corners and the center of the bed until it is uniformly leveled.

If the issue persists after proper bed leveling, it could be other technical issues that may require professional assistance.

WARNING: This response is AI generated and may contain errors.