AI Help
There could be a few reasons why you're experiencing issues with your prints. Here are some possible troubleshooting steps to consider:
-
Filament quality: Check the quality of your filament. Ensure that it is not tangled or damaged, and that it has not absorbed moisture, which can affect print quality.
-
Nozzle clogging: Verify that your nozzle isn't clogged. You can try performing a cold pull or a proper hot end cleaning to clear any obstructions.
-
Filament diameter: Verify that the filament diameter you entered in your slicer settings matches the actual filament diameter you are using. Incorrect filament diameter can cause under or over-extrusion issues.
-
Extruder calibration: Ensure that your extruder steps per mm are properly calibrated in your firmware. Incorrect steps per mm can lead to under or over-extrusion, affecting print quality.
-
Cooling: Check if your cooling fan is working properly. Inadequate part cooling can result in poor print quality, especially at ...
muted solstice