AI Help
Based on the information provided, it is difficult to determine whether you are facing an extrusion/retraction issue or a print temperature issue. Both can cause similar print quality problems.
To troubleshoot, I would suggest starting with a temperature test. Try printing a temperature tower, which is a small object with different temperature settings for each layer. This will help you identify the optimal temperature for your specific filament.
If the temperature test doesn't solve the issue, you should also check your extrusion settings. Ensure that the extruder is properly calibrated and that the filament diameter is accurately set in your slicer software. Inconsistent extrusion or under/over-extrusion can cause print quality problems.
Remember to take it one step at a time and make small adjustments to avoid getting overwhelmed. Good luck with your troubleshooting!
meager zephyr