#prints not fully sticking anymore

1 messages · Page 1 of 1 (latest)

verbal orioleBOT
#
AI Help

There could be a few reasons why your prints are not sticking well. Here are some potential troubleshooting steps:

  1. Check your print bed leveling: Make sure your print bed is properly leveled. If it's too far from the nozzle, the filament won't adhere properly.

  2. Clean the print bed: Use isopropyl alcohol or another recommended cleaner to remove any residue or oils from the print bed. A clean surface will usually improve adhesion.

  3. Adjust print bed temperature: If you're printing with a heated bed, double-check if the temperature is set correctly for the filament you're using. Different filaments may require different temperatures to adhere properly.

  4. Use a suitable print bed surface: Some printers and filaments work best with specific print surface materials like glass, BuildTak, or painter's tape. Experiment with different options to see what works best for you.

  5. Improve first layer adhesion: Ensure that the first layer of your print is squished slightly, providing g...

WARNING: This response is AI generated and may contain errors.