It seems like you are experiencing some issues with stringing and oozing/goobering when printing with Priline PC/CF filament. Here are a few suggestions to mitigate these problems:
Adjust retraction settings: Increase the retraction distance and speed in your printer's settings to reduce stringing. Experiment with different values to find the optimal settings for your specific filament.
Check filament dryness: Moisture in the filament can cause stringing and oozing. Ensure that your filament is stored in a dry environment and consider using a filament dryer or desiccant to remove any moisture.
Temperature calibration: Try adjusting the printing temperature slightly to find the best temperature for your filament. Higher temperatures can sometimes reduce stringing, while lower temperatures can help minimize oozing.
Evaluate print speed: If reducing print speed is helping with stringing and oozing, you can try gradually increasing the speed while monitoring the print qu...
pearl birch