AI Help
It sounds like you've tried a lot of troubleshooting steps already, which is great. Here are a few more things you could try:
- Check the cooling fan on the hot end - make sure it's running and pointed in the right direction.
- Make sure the thermistor and heating element are working correctly - you can use a multimeter to check the resistance of these components.
- Check the tension on the extruder gear - if it's not gripping the filament tightly enough, it could be slipping and causing the clogs.
- Try printing at a slightly higher temperature - it's possible that the filament is not melting enough to flow properly.
- Check the retraction distance and speed - if it's retracting too far too quickly, it could be causing the clogs.
If none of these steps work, it's possible that there is a blockage or issue with the hot end itself. You could try replacing the entire hot end assembly to see if that solves the problem.
robust yarrow