AI Help
There could be multiple reasons why your resin isn't setting under the UV light. Here are a few things to check:
-
Make sure the UV light on your printer is working correctly and isn't damaged. You can check the manufacturer's manual to see if there are any troubleshooting tips for the UV light.
-
Check the exposure time settings on your printer. If the exposure time is too short, the resin may not have enough time to cure and solidify.
-
Ensure that your printer's build plate is level and properly calibrated. If it's not leveled correctly, your prints may not be adhering to the build plate properly, and the resin may not cure correctly.
-
Check the temperature inside the printer's build chamber. The resin may need to be kept at a specific temperature range to cure properly.
If none of the above suggestions fix the issue, there could be an issue with the LCD screen or the motherboard, and it may be best to contact the manufacturer for further assistance.
vernal tusk
tired stag
simple juniper