AI Help
It sounds like you need to modify the holes in your 3D printable model to change the distance between them.
Assuming you have the original design file, you can open it in your preferred 3D modeling software (such as Tinkercad, Fusion 360, or SketchUp), select the holes you want to modify, and move them to the desired location.
If you don't have the original design file, you can try using a software like Meshmixer to modify an STL file. In Meshmixer, you can select the hole you want to move, use the move tool to position it, and then use the inspector tool to measure the distance between the holes to ensure they are in the desired locations.
I hope this helps! Let me know if you have any further questions.
lean hatch