AI Help
Based on the pictures you've provided, it looks like you might be experiencing two separate issues. The first issue, the bulging around corners and recessing on edges, is likely due to overextrusion. I would recommend calibrating your extruder steps per mm and flow rate. This will help fine-tune the amount of filament being extruded, resulting in more accurate prints.
The second issue, the indents where it connects to the base, could be caused by bed adhesion issues or inconsistent bed leveling. I would suggest releveling your bed and making sure your first layer is adhering properly to the build surface.
Also, make sure that your filament is dry and clean, and the temperature of the nozzle and the bed are set correctly.
Lastly, I would recommend printing a temperature tower to determine the ideal temperature range for your filament and try adjusting your print speed to see if it helps with the overextrusion issue.
I hope this helps!
gloomy eagle