#SV06 Level Bed Ends at 5 / 25
vapid cliff
this looks like you're running an sv06+ firmware on the sv06, tbh
just to explain what's supposed to happen here : it should test 5 spots that are closer to one another
instead it's testing a X = 0 ish (the start) then moving to half the bed, then increasing to the end of the bed, then trying to go further away as if it was going to reach 30cm in total
either that or the motors are turning way too much
try to just home it, then via the screen tell it to move 10mm to the right, then 10mm to the back
see if it moves by 10mm or more
then it's either a dud or they put the wrong firmware on there
it was already not working as soon as you opened it, right?
yeah I reckon it's best to not bother and just ask amazon to send a replacement printer
:|
don't ask for a refund cause then, well as you said the price went up
?
oh nah
that just tells the printer how far the sensor (the blue tube thingy) is far away from the nozzle
try the movement thing tho, there should be a menu that just says move
I wanna see if it's the microsteps being out of whack, with it moving double the distance it should
So both axes are fine
only thing I can think of here is the wrong size of bed was written in the firmware, which.... how even
that looked like 1cm long movements to me
hard to gauge without reference
ah you said 13
trying to find if it's a common issue on the fb group
check the belt tension on the X axis
if you "strum" on the belt is it tight?
this knob is what's used to tighten it :
vapid cliff
You could try asking sovol, maybe they just stupidly made a mistake with the firmware.
For reference the distance moved between two points is determined by the firmware.
And from what i could see on the fb group, people just run a third party firmware anyway to avoid issues... Can't search easily let alone link it cause I'm on mobile
vapid cliff
I mean sure, that would fix it but that's like taking a bazooka to kill a fly.
I do not recommend anyone install klipper without having used the printer a few days, usually. Although it's easy to install on commercial printers.
Octoprint is irrelevant tho
At the very least it does not look like an issue with motions parts from what i can see.
I can't remember the exact commands to check it from a PC
M502
long steepleBOT
vapid cliff
M503
long steepleBOT
vapid cliff
Ah that one, try sending that from a pc using pronterface or whatever software you might have used for flashing the printer.
If you have not used it, then download pronterface, connect the printer to your pc and use the app to connect, then type m503 in the console
That will return a bunch of settings of the firmware
Bleh reception in the metro is ass lol
long steepleBOT
long steepleBOT
vapid cliff
I'm glad you fixed it, sorry I couldn't stick around, but hey, looks like it was the X steps as I said :D
it's not e-steps btw, just for the record. e-steps refer to the E motor, which is the extruder.
long steepleBOT
long steepleBOT