#Pushed prints

1 messages · Page 1 of 1 (latest)

west pythonBOT Apr 3, 2023, 8:31 PM

#

#

AI Help

Hi! It sounds like you might be experiencing adhesion issues if your prints are getting pushed away during printing. Here are some things you can try to improve adhesion to the build plate:

Clean the build plate with isopropyl alcohol or soap and water to remove any oil or residue that could prevent adhesion.
Level the build plate to ensure that the nozzle is the correct distance away from the build plate for proper adhesion.
Use a bed adhesion material such as glue stick or hairspray to help the print stick to the build plate.
Increase the bed temperature by a few degrees to improve adhesion.

I hope this helps! Let me know if you have any other questions or concerns.

elfin turtle Apr 3, 2023, 8:36 PM

#

are you staying to watch the first layer?

#

I can't even tell if one of those prints is supposed to be showing the bottom

west pythonBOT Apr 3, 2023, 8:38 PM

#

Leveling Your Printer
Here is a handy infographic that will help with levelling your printer.

onyx socket Apr 3, 2023, 10:14 PM

#

I suspect your bed isn't clean or the nozzle is a touch far on the first layer

#

If that was from your first to layer then your nozzle is definitely a little far away

#

The first lines should be nicely blended together such as in that infographic

west pythonBOT Apr 6, 2023, 11:16 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 12:18 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 1:18 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 2:28 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 3:38 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 4:48 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 5:58 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 7:08 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

west pythonBOT Apr 7, 2023, 8:18 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.