✅｜help-forum
ender 3v2 so slow even with proper settings
Hardware
Software
Bambu P1S Weird layer fuzziness even after 50% speed and lower temps
Hardware
Software
Friend's printer is having printing issues that look like this
Hardware
Electronics
Ender 3 Max Neo Bed Warp?
Hardware
Full Large Print Bed Print Fails
Hardware
Other
Struggling to print Overture ASA ( Flashforge Guider 2 enclosed printer) Temp tower for reference
Hardware
Software
My Qidi Q1P refuses to keep supports from falling off
Hardware
Rough Edges on Supported Surfaces
Other
Software
Emboss cylinder Fusion 360
Modelling / CAD
My Elegoo Centauri Carbons First Layer Don't Stick, Can't Print Inner Threads
Hardware
Software
Loud clicking sounds, heavy underextrusion
Hardware
Giant gap
Other
Ultimaker filling in big holes problem
Other
Software
Base of print = Stringy
Hardware
Modelling / CAD
Other
Software
software broke
Software
[KINDA SOLVED] Print Breaks When Using PETG for Support Interface
Software
Beginner using mainsail.
Software
I for the life of me, cannot get this printer to be level - please help!
Hardware
P1S with 0.2 mm and a very slow filament swap
Hardware
Software
Beginner Designer
Other
how to remove that surface
Modelling / CAD
Support interface leaving major scars
Hardware
Other
Prints tearing off a couple minutes in on my Ender 3 V3 SE
Hardware
Minimize time
Software
Is this normal sound for P1S?
Hardware
Layer problem Elegoo Centauri Carbon
Other
Ender 3: Abrupt Y layer shifting
Hardware
Petg print
Hardware
Ender 3: small cylindrical objects are printing unevenly, everything else seems fine
Hardware
Bambu A1 with AMS won't load filament, checked and theres no broken filament.
Hardware
Effects Of Infill-Wall Overlap % on Annealing.
Hardware
Software
Electronics
Wavy artifacts under support
Hardware
Modelling / CAD
Other
Sv06 plus ace height map / setup
Hardware
Software
Solidify Print Layer Settings Help
Software
Ender5, ABS printing issues, appears previous users SNAFU'ed everything
Other
Elegoo Neptune 3 Max Auto Leveling issue
Hardware
Other
Software
Electronics
H2S Stuck Filament in Feed hole
Hardware
Recessed infill pattern on outer wall
Software
K3 on pushkin model my printer started sound weird
Electronics
Holes forming internally
Hardware
Other
TPU printing on a Bambu Lab P1S
Hardware
Software
Electronics
Supports needed?
Hardware
Other
Help me with smt
Other
Neptune 4 Max very bad prints
Hardware
Ideas for splitting up a model
Modelling / CAD
How to avoid that ripping apart and print this without support?
Modelling / CAD
Software
Wierd gaps
Other
Software
ultimaker 2 firmware
Software
Why is my extruder digging into my build plate
Electronics
How good is a bambu labs a1 mini
Other