✅｜help-forum
neptune 3 pro wont flash at all
Software
Z Banding (think it’s a slicing issue)
Software
printer doesn’t heat above 80c, when I try, it resets the printer and a light flashes from the mobo
Hardware
Software
Electronics
printer restarts after heating hotend to anything over 80c, when it restarts a light flashes
Hardware
Electronics
bad finish
Other
Significant issues with under-extrusion and inconsistent prints
Hardware
Other
PLA not sticking. Bought a CR touch auto leveler and installed it. Test prints aren't really stickin
Hardware
marlin
Software
Ive tried Everything Ender 3 v2
Hardware
cr 10 problem with heating
Hardware
Other
Electronics
cr-10 smart not leveling
Hardware
flashforge filament gears not engaging
Hardware
Defending Our Designs: Navigating the 3D Printing World of Licensing, Sharing, and Protection
Modelling / CAD
Other
Fokoos Odin 5-F3 Error 7
Software
PETG All metal heatbreak issue
Other
3d printer is not open
Hardware
Ender 3 pro extrusion gear failure.
Hardware
while bed levelling, skipping the x axis
Hardware
hi i have change my nozzle to a 0.2mm and when i do a purge for change filament color it skips
Hardware
Extruder hitting support on the right side about 1.5 in into the print (SV06)
Other
Problems printing
Other
Using up filament that seems to clog immediately
Hardware
ender 3 muntiplexer
Hardware
Software
Electronics
using acrylic as a build plate and lifted print
Hardware
Other
Can anyone help me debug why its printing like this
Hardware
Anyone knows how to flash a bootloader on Sovol SV06
Software
firmware update
Software
issues with outer wall not adhering on threads of bolt
Hardware
Other
Ender 3 v2 nozzle heat sensor
Hardware
Cutting thread in PETG, print orientation
Software
Anyone have any bright ideas on how to get heater cartridge and thermistor out of a heater block
Hardware
Infill is brittle
Hardware
prints not coming out clear
Hardware
Software
Silk PLA constantly stopping extrusion
Software
Clogged Nozzle?
Hardware
Wack Internal Bridge Infill, loose and curling on top of solid infill
Other
0.6mm nozzle, walls peeling, bad curves, weak print. (prusa mk3)
Software
random zits all over the print on first layer before the hotend clogged
Hardware
Klipper issues connecting to printer
Software
X axis is slightly short than y and z axis?
Hardware
Software
Ender 3 Stepper Stalling After Upgrade
Hardware
Software
Electronics
nothing printing
Other
Webcam latency on octoprint
Software
FDM vs Resin
Hardware
first print rn and i'm scared
Other
printing moving parts
Hardware
Software
potentially warped bed
Hardware
Trying to setup rpi with klipper inside a network
Other
layer height
Software
Y axis stepper stops mid program, is fine when program stops
Hardware
Electronics
Software