✅｜help-forum
power.. avr and ups off grid help pls
Hardware
Other
Electronics
Flashing bigtreetech SKR mini e3 v3 for cr10
Software
Buying mateirals and getting started
Other
Cooling issues on Qidi X-Smart 3?
Hardware
BTT SKR mini e3 v3 with no connectors for hot end fan
Electronics
Switched to a BTT SKR mini E3 V3 with Klipper, hotend nor bed heat up at all
Hardware
Software
installed bltouch on ender 3 pro, machine won’t turn on
Hardware
Electronics
auto levelling anycubic Chiron with klipper
Hardware
Other
Using a CR-Touch, when homing z, klipper moves to center but moves down infinitely
Software
Infill only larger parts PrusaSlicer
Software
newbie needs help 😅
Electronics
Printer unable to print anything
Other
thermal runaway for longer prints
Other
Help breathing life into an old CR-10s Pro V1. (wiring, electrical help)
Electronics
3d printing problem with seams I believe
Software
custom non-marlin firmware doesn't work
Other
Software
How get the nozzle position using a touchscreen panel
Hardware
Electronics
light sensor off and Z-axis keep moving down without a stop
Hardware
Removing filament and or manual feeding is difficult even when hot..
Hardware
Other
Weird stringing around nozzle issue
Hardware
How do i edit my gcode so that it starts printing above a certain height
Other
Klipper instantly pausing the print when starting
Software
Thermal runaway
Hardware
Software
Electronics
my print clogged up, how can i save it?
Other
Klipper on Ender 3 v2 with a BIGTREETECH SKR mini E3 V3
Software
Anycubic Leveling Issues
Hardware
small supports keep detaching from print bed
Other
Ender 3 Pro XYZ flashing ???, no motor movement
Hardware
Electronics
under extrusion?
Hardware
how to get puzzle effect in prusa slicer?
Software
Looking for help with slicing and optimizing model for printing.
Modelling / CAD
nozzle change problems
Hardware
Software
Gaps in Prints
Hardware
MCU 'mcu' shutdown: ADC out of range Error
Hardware
Installed BLtouch on my Ender 3 (upgraded to 4.2.7) and the last row of probing grinds my Y axis. Id
Hardware
How do I resume a failed print.
Other
what am I missing?
Hardware
Flashforge v4 lite retracting automatically the filament and then continue printing without any
Hardware
Way to many issues with my Ender 3
Hardware
Ender 3 S1 PRO major extrusion issues
Hardware
Klipper won't install on new BTT e3 mini v2 board
Hardware
Can't Print...
Hardware
anyone know how to fix this? Any help would be appreciated.
Software
Help with PETG adhesion on bridging and overhangs
Other
Bed Appears Warped After Nozzle Change
Hardware
Software
Electronics
Feeder messing up.
Hardware
Edges Bloating
Hardware
Software
Water damaged PETG possible issue?
Hardware
my 3D printer is doing this
Hardware
Other
Electronics
Software
I need help with my Photon Zero Settings
Software