✅｜help-forum
Ender 3 auto bed leveling its probeing only 10/25 points
Other
Software
Underextrusion or over extrusion problems in my prints maybe?
Software
How “not straight” is an acceptable amount of “not straight” for one of my leadscrews? Is this okay?
Hardware
Thermal runaway
Hardware
Electronics
What could cause this bulging?
Hardware
Software
Changing Junction Deviation Does Nothing
Software
Help with PETG Printing
Hardware
Other
Software
Elegoo neptune 4 pro an good option for reliable printer?
Hardware
adhesión issues
Hardware
to get it over and done with
Other
Software
Electronics
Partial clog?
Hardware
Other
Need original Gcode files for Ender 5 Plus
Hardware
Other
Software
Programs for generative design
Modelling / CAD
Software
Groovy mesh / Ender 3 S1, Klipper
Hardware
My Ender 3 s1 pro keeps rubbing the nozzle over the print
Hardware
weird printing bumps
Hardware
Mainsail Error with Orcaslicer: EXCLUDE_OBJECT_START & EXCLUDE_OBJECT_END
Software
Need some help with a Prusa Slicer gcode issue
Software
Surface/wall quality on prints.
Hardware
Other
My Leadscrews are squeaking, what should I do to fix this? Lubricant?
Hardware
Level Test Kobra 2
Hardware
Software
im struggling to level my ender 3 bed what should i do
Hardware
installing Klipper
Software
Z axis too close to bed?
Hardware
Print too flat in specific region, levelling and bed mesh not helping
Hardware
Bubbling/z seam artifcat issues
Hardware
Software
Electronics
Changing the position of the 25mm extrude line at the start?
Software
Supports doge model, Cura
Software
popping noise when extruding, bubbles coming out
Hardware
Complete failure printing X axis
Hardware
Is the general consensus that ABS and ASA only need an enclosure and PC needs a heated chamber?
Hardware
print stop not sure why
Hardware
plate in slicer doesnt align with 3d printer
Software
is this bad?
Hardware
Electronics
printer constantly extruding
Hardware
Extruder gear won't pull filament
Hardware
what do I adjust for this?
Hardware
Software
Can anyone diagnose this issue?
Other
Any recommendations on a cheap printer that can print Polycarb?
Hardware
what’s wrong with printer? under extrusion?
Hardware
3d print sponging issue.
Other
artillery hornet 3d printer Homing failure
Hardware
i just recently added a webcam and cooling fan to my klipper setup and its undervolting?
Hardware
Electronics
Very loud stepper motors after klipper update
Hardware
Software
Electronics
ERROR: Option 'z_offset' in section 'bltouch' must have minimum of 0.0
Software
Ender 3 x gantry
Hardware
Ridges
Hardware
Software
Spaghetti in the middle of the print
Hardware
Ekocycle Cube 3
Software
printer screen blank
Electronics
Software