✅｜help-forum
Ugly layers on printing
Other
i cant bind my new bambu lab p1s to my acount
Software
Why does Cura seal up my holes?
Other
Screen selection help
Hardware
What to tune next?
Hardware
Software
are heating cartridges able to explode on physical impact?
Hardware
Electronics
pla leaking on top of heater block..
Hardware
Is a heat block in this condition still worth using?
Hardware
I cant get. rid of these blobs
Other
ender 3 neo
Hardware
Software
how to fill some under extruded areas
Modelling / CAD
Other
Elegoo neptune 3 plus weird layers
Hardware
can someone explain mosfets to me?
Hardware
Electronics
Tuningtime for the V2.4
Hardware
filament isn't sticking
Hardware
Other
Good Multicolor PLA on Amazon, under $25?
Other
Filament motor in reverse
Hardware
Other
Software
Electronics
ender 3 v2 filament grinding issue
Hardware
Other
My cr touch is not working
Hardware
Software
xyz 3d printer motor failure
Hardware
Software
Electronics
gaps in lines + big hole???
Software
stringing
Other
Lots of Gaps in First Layer
Other
help with model in zbrush/ getting model ready for printing.
Modelling / CAD
Other
Software
Electronics
tpu filament came out like this
Hardware
Other
Fine tuning
Hardware
turnable but with nobs
Modelling / CAD
Bed not level after mesh calibration etc.
Hardware
Software
Help upgrading a forgotten printer
Hardware
First Layer Problems, Ender 3 V2
Hardware
Other
Extruder keep hitting print on tall print.
Hardware
Other
Modelling / CAD
Software
Electronics
Looking for help diagnosing my Ender 5's sub-optimal prints
Hardware
I need a crack genius in modeling
Modelling / CAD
Bed sheet upgrade help
Other
My 3d printer has a BLTouch Installed, but cannot auto home.
Hardware
Ender 3 v2 with cr-touch will not extrude during prints, manually extruding the filament still spits
Hardware
Software
X Plus 3 keeps messing up one edge of prints
Hardware
problems with btt mini skr e3v3
Hardware
Software
Not sure whats wrong on my prints
Hardware
Other
Terrible layer line quality, could be E-steps?
Hardware
Learn to use Fusion360 and Solidworks
Modelling / CAD
Switched Nozzles (now it won’t print good)
Hardware
Other
Ender 3 Pro Steppers Lock
Hardware
Software
Electronics
Print messing up at same spot on first layer
Other
is this dirty issue?
Other
how do i fix my cr touch??
Hardware
Software
Klipper Resonancy Testing Issues
Hardware
Software
Electronics
printer freeze sovol sv03
Hardware
Electronics
Strange sound
Hardware
Hi all, what settings do i need to change to minimise the gaps between the lines here?
Hardware
Software