✅｜help-forum
Advice to speed up ender 3 v2 printing times
Software
P1S having lots of print failures.
Hardware
Other
Software
Reviving an OLD OLD Aunycubic MegaS
Hardware
Qidi Q2 combo, "wrapping filament" error at random
Hardware
Other
Software
QIDI Q2 nozzle problems
Hardware
Other
Electronics
Ender3 printer starts print from too high up and cant stick to base
Hardware
Other
Top layer gaps between wall and infill
Hardware
Software
Bed level with CR touch but it doesnt matter
Hardware
Software
Nozzle too high even after manual level calibration
Hardware
Other
Software
Ender 3 filament feeding
Hardware
Splicer trouble
Modelling / CAD
Other
Software
error everytime i try to check the printer on orcaslicer
Software
Desperately need help-ended 3 v2 neo
Hardware
A1 Cable torn (?) off. Is this fixable?
Hardware
Building a "Figure Farm" Voron 2.4 (350mm) with Local Finds - Help Needed!
Electronics
Where can I find an STL for this
Modelling / CAD
Can anyone help?
Other
Could anyone explain nozzle temp discrepancy?
Hardware
Other
Software
Gap between colours on the same layer
Hardware
Other
Software
Serious problem help please
Hardware
Syncing up dual Z screws of Neptune 3 Pro
Hardware
Gap between different filaments on one line
Hardware
Software
Advice on making things look good
Hardware
Hot power board resistor
Hardware
Electronics
Filament not feeding all the way to the extruder
Hardware
Klipper control raspi 3B GPIO
Software
Adhesion issue
Other
Which all-metal hotend i should get? (V2 Neo upgrade)
Hardware
bmcu 370c AMS gui disapears. Using Bambu lab A1 mini
Hardware
Electronics
Software
I REALLY need help
Other
Printer has a weird pattern when printing at 0.20 layer height. Using a bambu lab A1
Hardware
Software
Understanding K1 Max Calibration
Hardware
Software
Can't connect Printer to Mainsail
Software
Filament tip shaping gcode?
Other
Ironing defects
Hardware
Software
Print Quality Problems on New BambuLab P1S (Overhang Failures)
Hardware
General printer upkeep tasks
Hardware
Software
Electronics
Weird sound coming from SV06 ace
Hardware
Software
Auto towers show no difference between setting changes.
Hardware
Software
Terrible layers, but why ?
Hardware
Bad layer adhesion or under extrusion?
Software
Whats my problem here?
Other
Software
What can be the issue here ?
Other
print stringing if printing too fast, hefty VFA if too slow. Any ideas?
Software
Why is this happening?
Other
Hotend Swap - Oozing issues
Hardware
Where to begin when troubleshooting multiple issues?
Hardware
My printer is acting up
Hardware
Software
Large PETG parts not fitting together
Hardware
P1S struggling to lay down good walls and fill.
Hardware
Other
Software