✅｜help-forum
What would be the best print settings to 3D print Helmets and eny other useful stuff.
Hardware
Other
Software
How to *actually* clean IPA?
Other
Issue with first layer & print quality
Hardware
Two color idex abs print having color contamination
Software
help with making prints look better.
Hardware
Software
Electronics
E3V2 issues
Hardware
tpe cant stick to the bed
Hardware
Under-extrusion at Layer Start and Small Features
Software
prusa mk4 starts printing then fails
Hardware
Electronics
at 3:50 his web is diferent than the link in desc
Hardware
petg stuck to glass
Hardware
E3v2Neo - Supports partially failing
Hardware
Other
Kingroon Kp3s power failure
Hardware
Electronics
Issues with water on rain gauge
Hardware
Modelling / CAD
SV06 bed level issues
Hardware
Other
Electronics
Software
Need help with printing a wall art (warping?)
Other
Water gun project nozzle
Other
Prusaslicer help
Modelling / CAD
Other
Weird horizontal print lines on benchy/brittle prints
Hardware
Other
Software
Articulation/Joints for action figure
Modelling / CAD
bambu studio will not load fill corectly like prusa slicer and prusa slicer no no work with x1c
Software
First layer issue
Modelling / CAD
Software
Y axis jumping consistently a particular height
Hardware
Camera Broken - QIDI Q1 Pro
Hardware
Other
TPU / TPE comparisons
Other
Camera Gone - Qidi Q1 pro
Hardware
Software
Looking to create notches in Blender on a 3D model so that the parts go together after printing
Modelling / CAD
Extruder goes idle after printing 1 to 2 objects in sequence.
Hardware
Software
second layer starts blobbing up on direction changes?
Hardware
Software
Crash course in gcode?
Software
Is this going to be a problem?
Hardware
Ugly overhang/ layers
Hardware
Other
Avoiding unsupported corners
Modelling / CAD
Software
E3D Revo pulling, stringing, and poor layer adhesion after PETG crash.
Hardware
struggles with Weak supports and brittle prints
Hardware
help to find a solution to print problem
Hardware
Z-offset
Hardware
Bulging rounded corners for PETG
Hardware
help to find a solution to print problem
Other
Software
How to print these corners?
Software
Creality CR20 PRO(?)
Other
My printer doesnt have a Cura profile.
Software
Speed for Ender 3v3 SE
Software
Electronics
Filament Runout Sensor not working.
Hardware
Software
Electronics
Severe leveling issues and first layer problems
Hardware
Software
printing support as one print and the actual print as the other. possible?
Software
Looking for someone who has a lot of time on their hands to help me build this DIY 3D printer...
Other
Sunlu Printer firmware help
Software
printer keeps creating squiggly lines while printing
Hardware
Other
Software
Klipper Install and Config Help
Hardware
Software