✅｜help-forum
please help
Other
F430 controller reset when bed temp >90°C
Software
Electronics
Holes and gaps
Other
Levelling issue
Hardware
Ender 3 won’t print
Software
do i downlode octoprint or octoklipper.
Electronics
Software
is this sound my printer is making normal?
Hardware
How to remove 'soupyness' near perimiters
Hardware
Other
Getting started painting
Other
Screw for Resin vat stuck (Mars 3 Pro Elegoo)
Hardware
Bowing/Warping SV06+
Hardware
Anycubic kobra extruder motor not woring
Hardware
Electronics
Sd Inid Fail - Ender 3 V2
Software
fix stringing on my benchys
Modelling / CAD
Software
Stepper Motor not moving
Hardware
Help with Bed Adhesion and Print Quality on Creality CR-M4
Hardware
Other
Software
bed leveling issues
Hardware
Modelling / CAD
Other
Software
Guys, where the hell do you get all the information about using a polymer 3D printer?
Hardware
Other
First layer issues with yellow PLA
Hardware
Software
Printables error
Modelling / CAD
Software
Extruder motor issue on anycubic kobra (second hand)
Hardware
Electronics
How to get rid of vertical wavy lines?
Hardware
Software
Anyone familiar with reverse elephants fitting and tapering in latter layers?
Other
just got an e3v2
Hardware
VFAs (ghosting) on Qidi Q1 pro
Hardware
Help setting the printer for Silk PLA
Hardware
Ender 3 Failing Benchy Print, But Can Still Extrude Filament?
Hardware
Other
Software
extruder heater randomly stops working for a few seconds then works again
Hardware
Cutting on cura
Software
TPU - Humid weather and bubbles while printing
Hardware
Wavy prints.
Other
interface change on ender 3 v3 plus
Software
"minor" stringing issue
Other
Software
Slight stringing problem…
Hardware
Warping issues causing print issues
Other
Best way to calibrate fan?
Hardware
Disable Nozzle Cleaning Macro
Software
Balancing a 3D printed fan
Other
are these sounds ok?
Hardware
print does not stick to the bed
Hardware
Printer (Sovol SV06+) Disconnecting from Octoprint (Raspi 3b+)
Hardware
Software
Electronics
Cura Problems
Software
Cleaning scraps that are stuck to the bed
Hardware
Modelling / CAD
Other
Pressure Advance woes
Hardware
Filament Clogging
Hardware
cant get any good top layers(and bottom) on my elegoo neptune 4 pro
Hardware
Other
Software
why is it doing this? (first layer)
Hardware
Other
Extrusion issues
Hardware
HELP!!! Klipper says config file does not exist
Software
how Can i have better first and last layer
Hardware
Software