✅｜help-forum
Was given a free 3D printer but I'm not sure where to start
Hardware
Software
Temp fluctuating and hot end fan stops spinning one in a while
Hardware
Electronics
Pokemon model kit DIY
Modelling / CAD
Other
My anet a8 is printing wrong
Hardware
Other
Software
Ender 5 Plus Toolhead, VVD, Entry Sensor, Klipper, Filament Cutter, no linear Rails
Hardware
Electronics
How can I gain better print quality (absolute noob)
Software
trying to figure out how to add text on orca to a booklet
Software
Printer prints blobs
Hardware
Electronics
I need help with my anet a8 i dont know how to change or update a filmware
Hardware
Software
Do I need to be worried about my health if I print in my bedroom?
Other
Elegoo Neptune 4 Max bed not heating fast enough
Hardware
Electronics
Print failure: model failing to print at supports
Other
Infill
Modelling / CAD
TPU(DRYED)+.6 nozzle
Other
Help needed
Modelling / CAD
Strings while printing
Hardware
PETG Blobs, Part too soft, Print temp, speed, and cooling isn't helping?
Other
Filament Snapping (Longer Lk5 pro)
Hardware
AD5M Help
Hardware
Sorry, I really need help with “unable to feed filament” on Bambu lab A1 printer.
Hardware
I don't know why, but on my Sovol SV06+, supports break mid print constantly.
Other
Bubbly SUNLU PETG
Hardware
Other
First Layer problem Bambu lab a1 with petg and biqu frostbite plate
Hardware
Unable to redesign to remove the need for supports
Modelling / CAD
Layer Squishing and Rough Surfaces
Other
Software
Small Printing Issue
Hardware
What is happening here?
Hardware
Software
Under extrusion on something straight lines.
Other
Software
Qidi Q1 Pro Homed Into Nozzoe - Bed is now Bent
Hardware
M5 adventurer flashforge
Software
Qidi Q1 Pro Gear Rod Stuck
Hardware
Hollow 'U-shaped' cover for Air Con cables (slicing/settings advice)
Modelling / CAD
Software
Warping issue for bridges
Software
everything is going wrong
Hardware
Other
Software
Electronics
Hi, im new at printing, i have LOTS of problems t.t
Hardware
Software
New To 3D printing
Other
volvo v70
Modelling / CAD
Other
Printer knocking supports??
Other
pfand (german )
Hardware
Modelling / CAD
Other
Buying a crimper for JST-XH
Hardware
Electronics
reduce supports
Software
Patch/Texture on face of prints
Hardware
What’s going on
Other
Whats causing this to happen?
Hardware
Subject: Ender 5 Pro (4.2.7) - Stuck in "Disconnect" Loop / Firmware won't flash
Hardware
Software
Trouble with the new Elegoo ams system
Hardware
Other
Software
Electronics
filament is jammed on nodule??
Hardware
Need help understanding one rule
Other
Prints coming out horrible not sure if there’s a clog or something else.
Hardware
Y coordinates incorrect after Firmware update
Software