Do Gateron Magnetic Jade Pros Need Special Stabilizers on Wooting 60HE v2?

[humble bay]

Hey everyone, I just ordered the parts for my Wooting 60HE v2 build and wanted to double-check something before everything arrives.

My setup:
• Wooting 60HE v2 Module
• Optimum Aluminum 60% case
• Gateron Magnetic Jade Pro switches

After ordering, I came across some posts saying Magnetic Jades have a 3.5mm travel distance, while many stabilizers bottom out at 4.0mm.
Apparently, that 0.5mm difference can cause the stab to keep moving after the switch bottoms out, which leads to the key tilting when pressed on the edges.

So before I buy stabs, I want to ask:
1. Is this actually a problem on the 60HE v2 with Magnetic Jade Pros?
2. What stabilizers work best for 3.5mm short-travel HE switches?
3. Are TX stabs, Durock V2, or Staebies safe choices, or should I be using something specifically made for 3.5mm travel?
4. If anyone here has a similar setup, did you run into issues?

Trying to make sure I pick the right stabilizers and avoid any wobble/tilt problems once the build starts

[balmy imp]

Thanks for posting your support request!

Note: #community_support is only for answering general questions and for troubleshooting.
All order-specific and shipment-specific support must be handled via the Wooting Support Wizard*
(You need to create an account on the Wooting Hub, using the same email address as your purchase. The account is not created for you automatically!)

Troubleshooting your Wooting Keyboard? Try these steps first!
Basic Troubleshooting

Questions about shipping, or what to do if your shipment has a problem?
Possible Problems During Shipping (with Solutions)

Looking for information about your specific order?
You can find that on the Wooting Hub! There you can also add upgrades, update your shipping address, and much more.

Is your order about to ship and you need to pause it for any reason?
Place it on hold via the Wooting Hub!

Do you need to...

• Cancel an order?
• Return/Refund an order?
• Get assistance with placing an order?
• Change the items in your order?
• Change your shipping address to a different country?
• Return a recent purchase?
• Get warranty support?

All of these types of requests need to be made via the Wooting Support Wizard!

[rapid forge]

You don't necessarily need other stabilizers. Keycap tilting with 3.5mm switches only happens if you're using really cheap keycaps, if you aren't, you'll be fine. I've never had any issues with 3.5mm switches on my Wooting keyboards.
If you still run into this problem, just get Geon stem spacers and put them on the stabilizer stems. This effectively turns them into long pole stabilizers, and you won't have any issues with 3.5mm switches anymore. No need to buy a new set of stabilizers.

[humble bay]

Thank you! Any recommendations for good keycaps brands?

[rapid forge]

GMK, Keykobo, PBTfans, Osume