Phantom Presses Wooting80he Tachyon + 8K Enabled

[narrow grotto]

Does anyone know the solution for phantom presses on the wooting80? It pressed itself on “ESC” and “B” Key Only While Tachyon Enabled, If i Set to 1k Its Fixed. But on 8K, When Tachyon Enabled the issue happens alot of times. Any Solution or help would be appreciated, Thankyou

[reef elbow]

Thanks for posting your support request!

Note: #community_support is only for answering general questions and for troubleshooting.
All order-specific and shipment-specific support must be handled via the Wooting Support Wizard*
(You need to create an account on the Wooting Hub, using the same email address as your purchase. The account is not created for you automatically!)

Troubleshooting your Wooting Keyboard? Try these steps first!
Basic Troubleshooting

Questions about shipping, or what to do if your shipment has a problem?
Possible Problems During Shipping (with Solutions)

Looking for information about your specific order?
You can find that on the Wooting Hub! There you can also add upgrades, update your shipping address, and much more.

Is your order about to ship and you need to pause it for any reason?
Place it on hold via the Wooting Hub!

Do you need to...

• Cancel an order?
• Return/Refund an order?
• Get assistance with placing an order?
• Change the items in your order?
• Change your shipping address to a different country?
• Return a recent purchase?
• Get warranty support?

All of these types of requests need to be made via the Wooting Support Wizard!

[low dawn]

Lower ur brightness, or use higher RT/AP or just use 1k polling

[narrow grotto]

is it a pcb faulty problem or u cant enable tachyon and 8k at the same time? 🥹

oh and i always set rgb to 0%

[low dawn]

i dont have any problem

[narrow grotto]

may i know what switch are u using

[low dawn]

default Lekker60 V2's

[last lake]

I'm having exactly the same issue.
My first ever experience of a wooting keyboard, the day I receive it and it immediately starts to type phantom keys, and it's constant. It doesn't matter if tachyon is on or off, it doesn't matter how bright the RGB is.

I've tried all of the things you've mentioned in the email -

Changed the usb cable
Changed the usb port
Reset the keyboard
Reinstalled the firmware
Uninstalled wootility and reinstalled it then used the browser version
Reduced brightness of RGB to zero
Replaced the switches that seemed to be effected the most
I've made sure no bright lights on it, no magnets or anything that could disrupt it
I even unplugged some of my other devices to ensure it's not power related..
Nothing helps

I contacted wooting support though haven't heard anything back yet. I'm genuinely staggered at this.

[narrow grotto]

i solved the problem at the moment for it by replacing it to the stock lekker v2s (which has phantom pressess), i used diff type of switches which was owlab ti. i havent experience any phantom presses for 1 hr testing on wooting analog monitor, ill update in 1 day of testing

[prisma loom]

Also throwing my hat in. I just got a wooting and am seeing these issues (tested on multiple PCs w/ multiple cables - though will admit my cables might be too long, which doesn't rule out the stock cable being defective).

Just received my replacement and am seeing phantom presses again on this one (on a stock cable). It's not as bad though - my last was unusable, and this is only unusable in Tachyon mode. Also still need to test it on another PC, have only tested my PC and laptop so far whereas the last one I was able to test on some of my friends' where it repeated.

I have some owlabs too might be worth swapping them in and replacing the lekkers... Just am worried about it in case I have a hardware defect

[last lake]

this seems like a widespread problem. bit of a joke really considering the price. i still havent heard anything from support either

[drifting folio]

i just joined this server for this exact problem, i've had my wooting since February and its been working great, but since like 2 weeks it has been registering multiple inputs on one press.

i changed the switches and tested some other stuff but from what i've gathered i think its a software related issue, i can't replicate the problem without rapid trigger and yes i've tried the Debounce Filter setting as well.

maybe its just a combination of tachyon mode with some other stuff, but i dont think the hardware is the problem so you shouldnt have to send your wooting for a replacement or something

[drifting folio]

try restoring your firmware, im guessing you guys are using the beta features.

heres a video from wooting on how you can do so
https://www.youtube.com/watch?v=bwnDyB72jxM

for me it worked and now im not getting multiple presses on my key i had the issue with

@last lake try this and let me know how it goes, i want to know whether or not the issue is purely firmware related
thanks in advance

[last lake]

yeah i had done the firmware multiple times its not made any difference - tried beta and without beta

nothing helps lol

[drifting folio]

sorry then man

hope you find the issue

[last lake]

same here, ty anyway!

[prisma loom]

I've also tried restoring on both of my keyboards, and same results - no help. I hope it's software related but who knows

[vivid crane]

Hey did you experience any phantom presses with the new switches so far?