TTC Spring swap

[proud fable]

Can I put some Lekker 100 Springs into the TTC Magneto RGB? I heard might not be possible, if so can someone explain?

[sharp locust]

The diameter of Lekker springs (6.1mm) is slightly larger than that of TTC’s (5.8mm), so although they do seem to work fine, you may encounter unwanted spring noise that you wouldn’t have normally.

[proud fable]

I guess it most be worth trying out, right? Thanks for your answer!

[sharp locust]

If you already know which force you prefer, then yes. If not, you can get a small amount of many different springs to try out from AliExpress. Either way, I would recommend getting springs from AliExpress because they sell 22mm ones which feel more consistent throughout the stroke:
22mm Magnetic Switch Spring Custom Mechanical Keyboard Magnetic Switches Extended Springs 28g 35g 45g 55g 62g 80g
https://a.aliexpress.com/_EzyxvWC

[proud fable]

Damn you represent a lovely community! Since I already got your attention, what would you think of friction fit the 60 Module into a self made case out of Alabaster-Stone, or into anything else for that matter? What Case are you rocking right know or what mods did you to your set up?

[sharp locust]

It would be possible for sure but you’d have to get the dimensions just right. The friction pad should neither be too tight nor too loose. Friction would be preferable as you don’t need standoffs in the case for that (you probably thought about that already hence you’d be going with friction). It would for sure look sick if you manage to do it.

[proud fable]

challenge accepted 🔥

[tall ledge]

i changed from 40 und 60 and 60 is realy strong. sure u want to upgrade that heavy? i needed more feetback because i use my wooting as controller for star citizen.

[halcyon spear]

if you are using your keyboard as controller , 60 is not that strong either 🙂 try 70, 80 or even 100