My buttons seem to double click? It might be a too low actuation point, but I didn't have this problem before tho, it started gradually getting worse since a month or so
#Wooting Double Click Issue
quick gyro
try putting ur rapid trigger to higher
Doesn’t help
balmy crane
Does it still happen with less sensitivity RT settings?
quick gyro
Does it still happen with less sensitivity RT settings?
yh, only higher actuation helps, but i switched the switch with a new unused one, and its working fine now again
balmy crane
yh, only higher actuation helps, but i switched the switch with a new unused one...
Which switch caused the issues? A Lekker or a 3rd party one?
quick gyro
Which switch caused the issues? A Lekker or a 3rd party one?
Lekker L45
balmy crane
Weird but interesting. It’s fully resolved after you changed out the switch?
quick gyro
Yeah changed it for a unused L45 switch
quick gyro
Weird but interesting. It’s fully resolved after you changed out the switch?
Feel and sound is different compared to the rest of my keyboard (all L45)
So it seems theyre not that durable
balmy crane
Very weird, they should essentially last forever.
quick gyro
Very weird, they should essentially last forever.
I dont know, the old switch and the rest of my most used keys sound clacky compared to the key with the unused switch I just installed
Might look into getting the V2 like someone suggested
quick gyro
So it seems theyre not that durable
Got them only in January, might be that I maybe press the keys harder than the avg person? Idk if I do and if that leads to shorter lifespan but just saying
balmy crane
Got them only in January, might be that I maybe press the keys harder than the a...
Nah, still shouldn’t matter. The magnet could be out of spec though, maybe too strong or too weak which causes the inconsistencies.
hot knot
Very weird, they should essentially last forever.
biggest cap of the world
they barley last few months
balmy crane
biggest cap of the world
You’re not supposed to stand on your keyboard bro
fr tho, wtf happened?
hot knot
You’re not supposed to stand on your keyboard bro
no they just stop registring inputs after few months or misinput
balmy crane
all of them?
hot knot
the ones used the most
hot knot
no like sometimes it doesnt register a input
or sometimes it just taps by itself had to change switches completly cuz got tired of shit lekkers
balmy crane
Did that resolve it?
hot knot
yeah better switches more durable and overall better quality and sound lol and more responsive at that
balmy crane
Which switches did you replace the Lekkers with?
balmy crane
I hope the issue isn’t with Lekker V2s 😬
hot knot
i mean lets face it lekkers are really poor quality xd
balmy crane
although rgb looks funny with them
haha true, white is red
balmy crane
i mean lets face it lekkers are really poor quality xd
On V1s tolerances could be a lot better. V2s come from a different manufacturer so that should resolve the tolerances.
The V2 manufacturer is the same as the Raptor and Raw HEs.
hot knot
On V1s tolerances could be a lot better. V2s come from a different manufacturer ...
well there is also big diff between
like for example u can rake tap freely on low rt with lekkers but on geons they barely register rake tap
balmy crane
like for example u can rake tap freely on low rt with lekkers but on geons they ...
Your Lekkers were fucked 😂
that’s not normal
hot knot
Your Lekkers were fucked 😂
doubt thats the case considering i even changed them with 2 replaceables from box
balmy crane
It’d have to be that the last batches are out of spec then or something
It’s just the magnet that has influence, the rest is the board itself
hot knot
got mine in july
balmy crane
you sure you unplugged and replugged the board after you changed the switches?
hot knot
when i was changing switches i unplugged board before
balmy crane
should be fine