#valorant
1 messages · Page 1 of 1 (latest)
ff000ec6593a25601d90358a3c8bc830b872
In your post you mentioned that when you strafe a and d your character suddenly stops?
if you're strafing and your character suddenly stops this could be due to not being used to such a light rapid trigger setting
could you clarify your post a bit just for me to make sure this is the issue you're having? if that's the case I can give you a modified profile to test
@torpid moth can u give me some profiles to test, I'm a very heavy key hitter unfortunately
I hit the keys hard usually, I started using a wrist support for Keyboard so now I'm hitting a litte lighter
but I need some profiles if you would 🙂 , thanks
By hard I mean I push them all the way down
I can!
Ehm i should probably make some more profiles for my guide
I think its fine now, i had to reboot the keyboard a few times, now its working fine
@stone fractal What profile are you using now
0d5693201fd726a3117e66d1424006871adc
this one is a medium end profile with 0.5mm on WASD and 0.35 rapid trigger upstroke
3b001c6f8557efdb1bfe15f0a4e89d931ead
if you're familiar with how rapid trigger config and actuation works try doing anywhere from 0.3mm actuation on WASD to 0.8
ill give it a try
and try doing 0.15mm rapid trigger and if you run into issues of accidental key releases
you can try 0.25mm and 0.35mm after that
ok bro
0.1mm to 0.8mm actuation on WASD is pro range as far as what profiles they use and this will change how heavy the key feels to press
and the rapid trigger sensitivity (upstroke specifically)
will control how easy it feels to release
just make sure that you separate upstroke and downstroke rapid trigger
there's an advanced settings option at the bottom of where you adjust rapid trigger sensitivity
that'll allow you to do that (:
feel free to DM me if you have any questions!