.
#My Modded "Stock" form Wooting60he
timber axle
timber axle
Stock case
Stock Foam
Tempest mod (5 layers)
Burger Mount (3/5 standoffs)
Glorious GBPT Keycaps
Re-lubed Stabs (for the millionth time/Holee Mod)
Lubed Switches (with lubed i found in MicroCenter)
PE foam mod (Packing Foam)
timber axle
Stock Case
Lubed Switches (Krytox 205g0 -> Top housing, Stem, Spring, Bottom Housing)
Relubed Stock Stabilizers (Krytox 205g0)
Burger Mount
Glorious GBPT Keycaps (Cherry Profile)
Bandaid Mod (Except for the spacebar section)
Stock Case
Tempest mod (2 layers)
Lubed switches (Krytox 205g0 -> Top housing, Stem, Spring, Bottom Housing)
Relubed Stock Stabilizers (Krytox 205g0)
Burger Mount
PE foam mod (0.5 packing foam)
Switch Tape Mod
Bandaid Mod (Except for the spacebar section)
Glorious GBPT Keycaps (Cherry Profile)
timber axle
Stock Case
Stock Foam
Tempest mod (5 layers)
Gasket Mount (Gummy oring friction mount)
Lube Switches (Krytox 205g0-> Top and bottom housing, stem, springs)
Re lubed and holee modded stock stabilizers
Switch tape mod
Poron Switch Pads
Glorious GBPT Keycaps
Neoprene foam in spacebar
timber axle
It looks like a gogurt
LMAO
timber axle
Mods:
Stock Case
Stock Foam (3 layer tape under)
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing and Stem with Krytox 205g0, Dieletric Grease on Wire, Holee Mod)
Tape Switch Mod
Bandaid mod (except Spacebar)
Tempest mod (3 layers)
Gloirous GBPT Keycaps
timber axle
Mods:
Stock Case
Stock Foam (3 layer tape under)
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing and Stem with Krytox 205g0, Dieletric Grease on Wire, Holee Mod)
Switch Tape Mod (2 layers Paper Tape/Medical Tape)
Bandaid mod (except Spacebar)
Tempest mod (1 layers)
Gloirous GBPT Keycaps
Gummy O'ring Mount/Gasket Mount
Poron Switch Pads
lime nacelle
hey thats pretty good
median temple
Mods:
Stock Case
Stock Foam (3 layer tape under)
Lube Switches (Krytox 205g0)
St...
Huge improvement from this one and the one before, what do u think made the biggest change?
wait whats the switch tape mod
is it just the kbdfans pcb tape
It's just two pieces of medical tape cut to fit whereever the stem touches the housing?
flint bridge
Mods:
Stock Case
Stock Foam (3 layer tape under)
Lube Switches (Krytox 205g0)
St...
why didnt you tape the space
flint bridge
Like tape mod all the switches except spacevar
timber axle
Mods:
Stock Case
Polyfill
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing and Stem with Krytox 205g0, Dieletric Grease on Wire, Holee Mod)
Switch Tape Mod (3layers Paper Tape/Medical Tape)
Bandaid mod
Tempest mod (1 layers)
Gloirous GBPT Keycaps
Gummy O'ring Mount/Gasket Mount
Poron Switch Pads
im sorry :(
me hab no money for blanks :((
timber axle
Stock Case
Wooting Foam
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing and Stem with Krytox 205g0, Dieletric Grease on Wire, Holee Mod)
Switch Tape Mod (3layers Paper Tape/Medical Tape)
Bandaid mod
Tempest mod (1 layers)
Gloirous GBPT Keycaps
Gummy O'ring Mount/Gasket Mount
Poron Switch Pads
(comparison)
hollow stag
do the switch pads change the way actuation distance works
timber axle
do the switch pads change the way actuation distance works
nope
for me its works fine but its best to not use bigger than .5mm
recommend .25mm
gaunt spoke
Stock Case
Wooting Foam
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing ...
Polyfill vs Stock Foam which one is better sounded for thock?
gaunt spoke
nope
for me its works fine but its best to not use bigger than .5mm
recommend .2...
there's no .25 where did you get that, I didn't see anything like that while I was browsing
timber axle
there's no .25 where did you get that, I didn't see anything like that while I w...
There is
Some websites sell .25mm switch pads
gaunt spoke
There is
Some websites sell .25mm switch pads
the link you sent me is .5 though which one did you use for the stock foam one
timber axle
. 5mm is what you would normally get which is fine
gaunt spoke
Stock Case
Wooting Foam
Lube Switches (Krytox 205g0)
Stock Stabs (Lubed Housing ...
which one did you use for this?
timber axle
which one did you use for this?
Cannon keys poron switch pads
gaunt spoke
Cannon keys poron switch pads
.5 right?