bright raven
**Keyboard
**HE60
**My issue is the right shift key is sticking down, and click when pressed.
**I have tried removing the lekker switch and changing it. It isn't the lekker, it's the two black support posts either side. they move up. and down okay but I wondering if the shift key internal posts are slightly out of alignment causing the black posts to raise and lower off line and hence sticking? The two black posts are interlinked under the board.
kindred nebula
Hi there.
This is typically one of two things. Either the switch or one of the stabilizers aren't completely flush with the plate (one corner might stick up ever so slightly, push down)
Or the wire needs a jiggle and a poke from underneath, which means you'll need to screw the top plate off and separate the PCBA sandwich to get at it. 😀
Here's a guide on how to carefully take the board apart with minimal work.
