#πβtech
1 messages Β· Page 741 of 1
pray for adsl2+
I was happy with docsis 3.1
Yeah it's complete crap at uploads
after moving I'm stuck with dsl and vectoring
they allow vdsl for business but then i need to pay for them to upgrade the infrastructure till my end
And when you do any kind of uploading at that speed the connection is unusable
adsl only have a limit of 1Mbps upload
my dsl is almost the same in uploads, but god that jitter, the same being... mayb half
I need to talk to my ISP to get my contract upgraded to 400 Mbit π€
rEEeee
@zenith sonnet Unitymedia?
Vodaphone/Kabel Deutschland
I'm thinking about cancelling my contract though
uplaod speed is disappointing
And reapplying through my wife
ah kk
To get the new customer benefits
there's usually not a good other option
But then I'll have to wait till May
vodaphone = vodafone?
btw
do you use their stuid router or you you already own your own docsis router?
vodafone exists in australia but its utter poop
ebcasue theirs are trash, especially for 400mbit
Current I've got a Fritzbox 6360 they supplied
It's fuming pile of crap
they're called vodafone
they bought unitymedia, which is basically the best widely avaialble ISP
believe me
the fritzbox is god tier
in comparison to the other crap of them
The basic one (Hitron) they supply I thought wasn't all that bad?
we had a technicolor one
that was complete garbage
and then the horizon box
the horizon box shouldn't even exist imo
That screen is cool
it's so bad
But why?
it's a phone
Oh lmao
yes is a phone
why: on the fly temp checking, it doesnt live in my case permanently
rate my setup
Anyone, planning on using it in Bridgemode as a modem only, and getting my own router
They disabled Bridgemode in their custom firmware for the Fritzbox, which sucks
And getting my own router with SQM
@latent mural that wallpaper makes it look like gpu is fucked π
your table is like 3x the size of my one
and excuse me for the RGB madness the corsair setup isn't loaded
The Fritzboxes can't do SQM
ye gimp fed up and I didn't botehr fixing it
I never see the wallpaper anyways
had to make my own since I usually use 3 monitors
Tino: Bob why do you still have that smoll table
That postcard size mousepad is a sin
and why the g502?
y not
it's sooooo heavy
Heavy isn't bad
Although I'm happy I upgraded to the G Pro Wireless
fun fact: i cant tell the difference when it has weights and when it doesnt have weights
oof
@zenith sonnet have that one too
currently use the Zowie FK1 though since the shape is a lot better
i really like the 502 but the cable braid problem bothers me a bit
Zowie has WAY too much mouse lag
i want a EC2A once this dies
rip
I regularly have 200+ Tabs open, because ya know, I might need them.
Nope, I'd notice those extra 8 ms or so the Zowie needs longer to get a signal to the PC compared to the average Logitech mouse
But maybe I need them.
Yes. That's the point. But maybe somewhere in there I scribbled down like 10 windows keys.
200 tabs of por-
But I know its stupid.
unsure if i can simply use the phone as the router for a internet-only sim card
@latent mural you could do that
@latent mural my friend lives off his s3 plugged into his pc
fun fact i was cleaning out my garage and chucked out my 75hz monitor
Radeon VII NDA lifts in 3 hours
Works starts in 2 hours
Fuck my life π¦
eg: my all in one overclocked from 60hz to 75hz
Don't do keeping.
They ruin your space
I kept all boxes which came woth the parts of my setup
I have too much space
I can barely move
I keep my boxes
Ye I used to
i chucked all my boxes into my inwin A1 box
I once had enough space.
cause ITX box is small boi
Now I only keep boxes with value >Β£150
And peripherals
Now the garage is filled with magazines and other stuff.
For serial numbers for warranty
Anyone has experiences with royal mail UK to Germany?
@spare wave in what regard
if you do it before brexit it should be similar to normal national mail
so no extra import fees etc
although it'll be more expensive
A Royal Mail guide to posting to Germany from the UK. Learn everything you need to know and buy postage for your letters and parcels to Germany.
@zenith sonnet Not sure exactly what influences the speed, but there are mice faster than Logitech's offering for clicking
Maybe, although there isn't much left to be gained
It should already be sub 5ms
I've bought a kickstarter mouse which uses optical switches and their focus is on low latency
should be pretty fast
yeah couple milseconds at best
But tracking performance is way more important than one for two milliseconds when clicking
And nothing beats it in that regard
how so? do you mean the sensor?
alot of mice these days have 3360 or 3389
but pretty much all mice are good enough in that regard
shape and weight are usually more important
everything 3310 and up is more than good enough
Sensor, plus information delay
build quality is important too
althouhg zowie is good in that regard
logitech sometimes has problems with low humidity enviroments
they can't switch from omron though since they are partnered
I read somewhere the use custom Omron switches on the Pro Wireless, but I dunno the details
The clicks feel perfect, though
they switch to kailh or huano
since the omrons can double click
usually in low humidity
they build up static electricity
the otehrs don't do that
huanos are heavier
personally I hate logitech shapes, their weight and etc. Their F/W quality is pretty good, but they've fucked up pretty bad in some cases.. For example look here: https://www.overclock.net/forum/375-mice/1714538-3366-mice-have-different-framerates-maximums-either-8500-11500-a.html
edit: original title was "g pro (3366) running at lower framerates?!? aging or are g pro's weird?" this is not due to aging and not specific
and zowie switched to omrons but their qc said that all omrons should be returrned and they switched back to huanos after that
Ive bought omron's before and they all feel different. Hard to choose 2 from a box of 20
The newest Logitech mice come with the Hero sensor, not the 3366 any more
aye
It's normal for switches to feel different though
dont like how logitech didnt do anything new with the hero 502
except for logo and sensor
hero sensors had some issues with drawing straight lines at low speeds iirc
all i'm saying is omron switches have a lot of variance
wireless g502 tho
would buy 100000%
503?
a brick is a brick is a brick π
G602 is the closest thing to a wireless 502
uhhhhhh
Turn on the light? π
Logitech doesn't offer glossy surface and they all feel like soap to me, that's my biggest issue with them π
I have to swap out the twooting when it's here though :^)
Wish I could afford twooting
I'm seriously over budget for this month xd
I spent 240ish dollars on the wooting1
Which is probably the 2nd most expensive thing in my setup
That is not an efficient use of acoustic foam
may i suggest something else
but if you can't be arsed, that's ok too
well those squares certainly weren't cheep
Yes lotheawen, cable management
you mean the sound foam @latent mural ?
i'm looking for something to do decent cable management
yes, i need like a nice cable gutter that doesn't cost a kidney :p
foam costs a kidney
it really is very expensive
i mean furniture foam
cant get cheaper
you people can't buy pro level :p
it is
better just use some pretty Velcro straps
cheep sound foam is really just packing foam, and this still is expensive for the amount in, let's say, that photo above
each piece there costs no less than 3 euro
but why
why get foam
of all things
24 euro for something you don't need is still 24 euros
well.. it doesn't look cool
expense is different to different people clearly
it wont be 3 euro per piece unless they look for it
and it will do nothing acoustically
and it's placed to do nothing acoustically
it's several misaligned tiles
that is no cool looking at all
you're welcome.
What's a ghetto way to make a mouse bungee
a box
I'm not even /s, I'm playing like that
lol you are?
yes
ok cutting wire
But it costs money regardless that's not nothing :D
@fallow bison it proper pissed me of in bdo
When In the middle of a duel
I'd start randomly spamming attacks
Because of my mouse lmao
Looked like I was using a script
Oh damn
Yeah try booting into safe mode once
use it for a lil while and see if it still occurs
paracord is nice
Honestly tempted to return it and get a g503 xD
Which one have you got now?
Corsair glaive
Would be a little abusive not going though rma but instead amazon tho
Ngl
Ye I stopped naming it that
Because people got confused
Haha
It's a greet mouse
i had a 502
After 40 min
?
Lol
wtf
was it the rgb version?
But I have bad luck
Anyone playing apex legends? It's a surprisingly fun game
ah shite
Keep forgetting there's other channels
Who isn't playing it
Yeah man, check this post. It has more photos of mouse molds: https://www.overclock.net/forum/27822044-post1714.html
Post 27822044 - An overclocking forum devoted to maximizing the performance of graphics cards, CPUs, motherboards, RAM and everything else found inside your computer case.
delayed a bit. Around march/early april at this point. Available on amazon then I guess
@karmic grail it's an awesome game!
I'm not sure.. But Amazon and ofc to KS backers are already confirmed. Could be maxgaming aswell, hmm
interested to try the LK optical switches
Damn. I guess you could get one straight from him though, thru the website
Ill let you know how it is once I receive mine
how big are your hands?
And so light
Enough to shut you up boi
Wait
I'm getting mixed up
Ha
I was thinking g402
ahhh
the g402
didn't like that one
the 403 is larger
and about 90g
so weight is fine
yes
the 305 is extremely cheap on the used market though
I could currently get one for 15β¬
that's pretty cheap indeed
and it seems to be in new condition as well
I think they disconnected the wireless version
I have big hands though
there are multiple wireless g403 versions
the g603 and 703
I've got a unused g303 pretty much in new condition. People seem to buy them for large sum since it's EOL and in perfect condition. Should probably sell for 100β¬
the g305 is available on the used market for half that
:(
F
F
just solder it 
And since tis from China they don't give a shit
lol
Nah the pcb has gone
they are like fujitsu with the hhkb
Sorry what
Oh
I mean if I don't fix it
Can just have it for free if you pay delivery
Tbh
It's not like I can unsodler the switches
XD
Last time I tried doing that my cap lock no longer works
XD
dam son
can you take my CM storm quickfire rapid (mx reds) + Frosty Flake MCU slotted in?
It's broken
the port is broken π
haha Tino, can you fix it
Ill think about it and then maybe mail it to you if u want
There's a small pcb inside where the microusb -> PC port is on. That port fell off the tiny pcb. If you can fix that its yours lol
wtf
I was considering sending off my 75% to have leds socketed properly and caps fixed
But the quote was like Β£30
I can live without caps lock and half leds not working π
Cost me a fortune
how much are those anyways
I was stupid spending so much on my first keyboard build
never looked up the price of the 60% boards
Cost me overall like $200
reminds me roommate has a mxboard 3.0 with a broken usb header
maybe I can fix that too
If we include everything
oof
I kinda wanna build a keyboard
Don't do it
But the $$$ is just too high for my liking
that's why I'll get the GMMK once the ISO version is out
The wooting 1 is already up there on the scale of expensiveness
*my scale of expensiveness
I have my other wooting in display next to my dead Anne pro, k60 and k65
I tried looking for another wooting in an Australian Mechanical keyboard group
Somehow I still come back to my wooting one even with my 75% being sat on my desk
It was either people looking to build with the switches or my post when I first got it
π
Feel kinda bad that I don't use it often
soo @pale sigil should I dm you my address?
How did u kill an Anne Pro?
lol
and whyyyyyyyyyy?
Does anyone know if EU consumer rights extend if you're buying outside of the eu?
Nope.
These on W1 π
Damn because I was going to see if I can get s replacement or partial refund
pls no
Japan might soon be the exception though, since we're about to get an open trade deal with them.
alright getting a set
those keycaps
Look perfect
japan might become an exception
but private import will apparently stays expensive
Shall I
It's a dram of mine since school
To play Minecraft in a lecture theatre
Ha
Is this even a question callum
Don't even know how to operate or or if I'm allowed
Lol
Only ever used the new ones
π
"f"
naaaa! i want i fast in my house! it can come in chineese, is ok! jus come already
but damn.. i'll have to paste some papers on the keycaps
@latent mural powercolor already said that they ahve no palns but that it may change if there is enough interest in the card
@swift wharf why did you order german if you aren't german
Alright one of these
Just to fit the "gamepad" theme
orrrr you swap the keycaps kenny?
@latent mural two things, 1- im portuguese, 2- im not that smartt
Are there different symbols on a german kb?
hmmmmm swap keycaps seems intelligent, but there is no portuguese caps equal to the originals xD
yea! only the symbols change
Oh portuguese has different ones
Z & Y are swapped. And the symbols underneath the numbers are different. Those are the main label differences
german has Àâü
Try to contect them, if it isnt possible, just change the keycaps
and more double/tripple layer symbols
+*Β΄`~^ΒΊΒͺ-_'?!|«» need these ones xD
Ah right.... I'm on Nordic and we have those too, so I always forget to mention them π
Or if ever you want PBT, order the right one ;)
you get most of these
lool ^^
Imma register and see what it looks like
We'll the dickbutt keycap looked a bit not to my liking
doesn't look too good for Radeon VII
TLDR: Pricier 2070 that gets hot. Not very competitive
more like a somewhat sluggish 2080
but yes
if it was 100$ less than the 2080 it'd be good
or even 50$
Benchmarks say 2070.
some yes
some no
whihc benchmarks are you looking at btw
they still have that uneven contact problem the original vega cards had
so maybe another reviewer got a bad model
Our own. BFV, FC5, Shadow of the Tomb Raider, Deus Ex and a few others
ok
GN noticed problems with contact on their card
performance is somewhat between 2070 and 2080 usually
poor amd
at least for games
It also gets hot - Seriously hot. We saw over 100C in Black Ops.

Oh well
what did you expect
I was hoping it would match the 2080 a bit closer.
want to order mousefeet for my EC1-B but forgot
guys the embargo just lifted I know but can you chill with the videos
Maybe needs some driver optimisation just like ryzen
and I want to order it now but I can't get the paypal sms due to not having any mobile reception i nmy office
maybe
then the release bios is especially bad
Only watch optimum tech cause his videos are extreme quality
but what's the performance with tessellation overridden to x32 in the control panel?
semi serious
likely good but irrelevant
maybe it jumps up by 5 fps
maybe ahead of the 2080
I'd like someone to test it but i cant find anyone with a fury/vega card among my contacts
get one yourself then
just buy a produo
just for that? nah
7nm and gets hotter and less perf than 2080. Pretty obvious its just a datacenter/compute heavy design
new mining cards :p
hopefully amd zen 2 trashes intel so AMD can design proper gaming chips
well, intel was getting hammered already, but they already had some designs it seems :p
I don't think AMD's investors would like that, in fact i think Intel or apple will buy RTG
they just want to use their quadcore cash cow some more
well they need to increase it a lot
GlΓΌhwein
the card should've been 10% faster at elast at launch
But this is a previous MI50 so It's probably as fast as it gets
just wait for navi, like for vega, and for fury...
anvi isn't high end though
well this year's top navi is surely going to be a 1080
I hope
if you have anything in that range you shouldn't be upgrading to anything anywway
needs to be extremely cheap though
Inb4 Radeon 5
if they don't beat Nvidia in any point nobody except fanboys will buy it
Rtx2060
Big swing from amd with Radeon 7 but for now it's a miss
Hopefully driver updates will fix that
they'd need to make the card 20Β° cooler while improving peroframnce by 10-20%
and push prices down by 100$
and not increase power usage
while also fixing problems in the manufacturing plants which require extreme precision
at some point people ahve to admit that it's not a good product
oh boy
the cheapest card on the german market
a 2080 is easily 50β¬ less
if not even more
Just checked radeon 7 bdnchmarks 2k - slower then 2070 lol
HOT DAM
vega 7 is.......not good....at all
pretty much all the offerings right now are garbage
they are so xpencive
and for little performance boost ofer the last generation
@digital cliff not holding my breath.....its probably going to be sub par as well
no.....
but that doesnt mean i dont want to see compelling deals
and right now.....theres none of that
800 usd
kms
atleast the rx580 exists at a decent price
jesus.....
getting ripped off
wellll....
people do the same thing to apple
so i guess its no surprise when you have a fanbase like that
yeah
thats asus
i bought a strix
and it never came
managed to get a refund
idk why prices keep going up
Because people keep buying them 
milking fans
Back to the setup
I know about my cables and I'll ziptie them together today ^^
And also the foam i got was rather cheap and i had it there while most was empty to stop echoes in my room
Tbh hanging posters, paintings or other decoration around in your room will work better than those few foam plates behind a monitorπ
http://unihedron.com/projects/spectrum/
Just use this poster, over and over.
Yes definetley
Ah the good old wallpaper picture every poster seller uses
Yes
Hop on etsy or redbubble or something, they'll sell things of that nature
Or maybe wish
It's from etsy
Gog my 2080 msi trio for 639 as black friday deal, quite happy with it tbh
Damn it, AMD
At least put a decent cooler on the cards if you make them throttle so hard
Well, with reviews that terrible, one might actually be able to buy one of those
Granted AMD got actual stock to sell
I thought they didn't lol
Suppose it's because of the HBM2, the card never gets above 80Β°C even directly under the die
didn't someone post an article about how rare they were?
Yeah, it's true
There is literally no stock right now
Will probably be March until we see the first units trickling in
Card looks worse in reviews than it actually seems to be, though
That whole 'finewine' thing aside, which is (un-)fortunately true
The card seems to lose like around 10% performance due to thermal throttling
Not because the cooler is bad, but because it tries to maintain a really low temp
Lol, go check out the thermal images at Tom's HW, it literally never passes 80Β°C, even in a torture loop
@fallow bison You should consider sticking dense rockwool inside those, they will make your room sound a great deal better you'll have to be a little picky on the fabric you print on
@karmic grail That's pretty good! I haven't had a good reason or time to try it out.
even 80Β°C is pretty bad with a triple fan design
just through it in my driveway, I'm sure it'll stay nice and cold
that's what real overclockers won't do
π
but dont real overclockers put it into ovens?
I just told you to put your computer in my driveway, do I sound like I know what real overclockers do Β―_(γ)_/Β―
idk man im not overclocker either
Urgh, the GPU market looks so terrible right now
Yeah but it's not been good forr a few years
β
My 5 year old 290X is still trading blows with the 580, so that'd be more like a modernisation than an upgrade
The VEGA 56/64 aren't quite the power level I want, but a bit too expensive to buy to bridge the gap till next gen
Radeon VII needs to be watercooled and drivers first to be good
And getting a 2070 or 2080 would mean I'd also have to spend some 600β¬ or so to the a good GSync display with it
Oh, and Navi is still a good half a year away, that might fill the gap
But by the time it's out we'll probably see rumours of the 'Radeon 8', which is more like the tier I'm looking at
So either I'm looking at spending like 2500β¬ for two 2080s and two displays for both racks
Or wait...
you gotta have alot of money to throw arround
Yeah, I'd rather avoid doing that
Already have CPU upgrades planned for late summer
Waits 3 hours for package to be delivered (usually mail comes at 11-11:30 ish)
It's now 1:15
Got a new keyboard
How long until people will understand that navi isn't planned as a high end product
Feel like I need a GPU upgrade. I donβt have enough vram for a lot of my renders
Yeah but shits expensive right now
I feel like a Vega 7 would be good for my stuff
But idk
I would wait a bit, for the moment 2080 and v7 are evenly priced with 2080 being 8-9% faster over a set of tests
However, V7 should get 1-2 driver versions before we can judge it honestly. The performance in DX12 is great, DX11 on par with 2070
There's a lot of questions
Also, how much perf you can gain with better cooling
I don't need better drivers to judge it. It's hot and loud. That's all I need to know π
Investor relations
They have to look like they are doing ok
if their graphics division is missing in action it looks like a disaster that's burning money
Amd doesn't have to announce how many they've sold
only how much their gpu division has made
and they may even lump it together with semi-custom(consoles etc) which will make them look even better
They must have had a reason for it
It does help their image to the consumer, even with reviews that leave more to be desired
It's called Radeon VII
maybe they have so many MI50 that no one needed
No Vega in the official name
psure its build on vega tech
thus the speculations of it maybe having spposed to be named vega 2 (ii)
7 doesnt really make sense other than "7nm"
thing is if we shorten that to r7 well we have that already
I don't think companies buying it for solidworks will have any trouble typing that out π
Unless amd no longer has the solidworks advantage :x
Lol, this review
They undervolted the Radeon VII, cut power draw by 70W, without a loss of performance
Giving it better perf/watt than the 2080
where what why
I don't speak telefonmast, hold on
Don't ask my why...
Would have fixed two of the bigger disadvantages of the card, noise and power draw
And but it on the same tier as the 2080 in that regard
Well they would do it in case of bad binning
Technically, they are MI50s that didn't make the binning, so...
Maybe that's one thing that navi will have, figuring out what voltage it needs better
@latent mural isnt solidworks dominated by quadros
idk i checked the scores submitted for 2019 all the top ones are quadros
well then i guess their lead is gone
2018 same deal
the manual for solidworks 2016 still suggests amd cards though
2016 oof
2 years in the no-it-department-or-single-manned-it-department somehow means nothing
certainly having the most benchmark results
i mean amd had a nice price/perf ratio going but now u could literally just buy an rtx card for the same price and get more
im just joking
Well most of the solidworks-station pcs I've seen in the universities here were running either a fire or ..nothing at all, an intel
good i dont use solidworks
i mean they will work its not like they wont work or anything plus they are cheaper than quadros
You can now use an adaptive-sync aka. FreeSync monitor on an Nvida graphics card without any workarounds or hacks as the Nvidia driver now comes with native ...
very odd results
Posted that a few days ago
Basically means don't use if you don't have the hardware already in place
Is Nvidia's driver just worse than AMDs, or do they try to make Freesync look worse than GSync? π€
Or maybe the 10ms lag adds fps?! 
Imagine if that was true, that would be funny
FPS vs lag, the sweet spot
maybe rendering things in a delay already happens in some engines?
with a delay and smaller frame rate
So uhm, i was looking for βslow walkβ keyboards. Does anyone here use wooting?
How is the reliability?
wooting sends xbox controller inputs to the game
the keys you choose send the "analogue" data as if it were a thumb stick
so the reliability is really "is this game ok with the player using a mouse to aim, keyboard for functions and xbox controller for movement"
Thanks, i meant reliability like does it have a warranty or does break after a month or 2?
If you throw it out of your window on the 5th floor daily, maybe
otherwise I think I only heard of 1 person having an issue that required them to resend it so far
Haha. Thanks. What about the βactuationβ programming? Is it complicated? Im not very tech savvy
Is it a plug n play product?
you move a point up or down
Like a regular gaming mouse with its own programp
slider rather I guess
Plug and play
All keys are analog
Amazing spectacular support like no other cough
Awesome software
Love
Dope warrenty, tinkering is encouraged
Good lasting switches
I need analog keyboard, i thought the optical ones were better but apparently they dont work like analog
The Wooting supports native analog but for games that dont support it xinput is used.
Nicee..
You can find the SDK on dev.wooting.io
I need the smooth preset or linear
So linear is the best preset for the most accurate slow pressing on the key i guess?
Thanks guys
the 4 dots are movable
if you're referring to cooler masters keyboard, its not their tech, it uses weaker switches and only some switches are analog, its extremely expensive and they aren't as open source.
Yeah. And I honestly prefer supporting start up companies
its more stable but imo and you can say im bias but im not, you're getting more from a Wooting for both cost and reliability.
My decision is 70% reliability and 30% support for company haha
But yeah. U guys sold me on this. Ill now look up how to purchase one
Thanks again
When is wooting 2 gonna be on sale?
You can pre order now and you will get it soon.
As there is still some stock left.
But only in EU.
And international
UK Red, black and blue
German blacks
Nordic black and blue
It will be a bit before new stock arrives for the Wooting TWO
\o/
Thanks again
np!
@latent mural there's a wooting two too
"When is wooting 2 gonna be on sale?" he said xD
Only pre order atm
I picked red switch coz the blue ones are the noisy ones i supposep
they aren't that noisy tbh, burt everyone has different opinions on noise levels
I drove home tech a friend gifted me
I may have gained a lot
+20β¬ as a thanks for rewiring his pc and making it clean
ugh i regret carbide
taking money from your friend? taking money for work is getting paid, no in between
i helped my mums bf once with my laptop, turned up with a huge box of my fave cider π
An I replace the capslock key with one thats half cut
Why do people give us so much money for basic stuff like that
I press capslock by accident sometimes
Ye but still
a friend helped me in uni, saved my ass.
I wanted to spoil the fuck outta him
even though all he did is something that takes a normal person 20 min
xD
4 Corsair Fans (RGB I don't know which though)
A Case
16gb ddr4 ram
+20β¬
For rewiring a PC and cleaning it up so it looks nice
last time i was playing air guitar with a mainboard a friend bought
his gf came in and was like "isnt he breaking it" and he was like "na itll be fine"
somehow i wish i had a recording of it
He gave me a lot of tech in all the time I fixed his stuff
The way i do things are
Family = Dont ask for anything except a thank you
Close friends = Dont ask for anything but a thank you or a drink next time we go out
Friend of a friend = low rate charge depending on the request
Rando = money
because ive been in situations were i spend an entire day fixing shit
and for someone i barely know
no thanks
I don't do this as a job
I work as a joiner actually lmao
My neighbors do it all the time and it pisses me off
for me its
friends of me: free
anyone else: money
@sick creek i did it, you proud of me.
Aight
I put everything in a cart for price
Everything he gave me over the years
That's excluding the stuff that were broken
i usually give my hardware to my less fortunute friend.
Same
I gave a 960, fans, psu, cpu cooler and 16gb ram to a friend
so he can get into it
my i7-4790k with 32gigs of ram and a gtx 980 ended up with my best girl side friend
Saying that now i have nothing and ive been trying to find some cheap hardware to make a new NAS π
All i have spare atm is PSU and storage.
@fair gull friendzoned tho?
?
oh the girl
well
i mean sure if she would be available i might try getting her
but i did sleep with her a few times
OH
and no i didnt make her cheat she got a friend after shit between us happened
cheeky
Thanks for the sleeping sessions wink here's a GTX 980, 4790k and 32gb of ram
"i never forgot bby"
dayum that would have been a good line
shit
next time ill give her a burrito and say "i never forgot bby"
i mean she prob doesnt even remember tbh
Btw I didn't calc in that he gave me an iphone
iphone 7 128gb
I don't know the exact price
And I actually don't want to know it
i dont own any iphones
I own one since december
i personally wouldnt accept it no matter what
I decline every single time he offers me stuff like that
He just gives it to me and declines taking it back
i mean if i somehow still ended up with an apple product i would just destroy it
i dont they are from my mum and sister π
He's mental
why not link http://playdiablo4.com/
analog mouse?
Buy Swiftpoint Z Gaming Mouse, Voted Gaming Innovation of The Year. Tilt, Pivot, Click Softer/Harder to Experience unprecedented intuitive Control in MMO, FPS, RPG, MOBA, or Flying/Driving Games: Gaming Mice - Amazon.com β FREE DELIVERY possible on eligible purchases
mouse that hast tilt, pivot and "deep click"
aka DKS
o
oh and it detects how far it is from the table
so u can literally use it to fly helicopters in games
@fair gull Really wish it was easier to merge inputs between Wooting and Swiftpoint.
u own one?
Yup!
i wish id own one
they seem so fuckin good
wooting needs to make smth like it
wooting z
I mostly use the gyro though to basically access a second layer to commands. Different hotkeys and macros. Using it to control aiming and what not kinda makes your aim more unstable.
it would prob be nice for flight sims
and arma etc
or somewhat replacing a steering wheel
Maybe it works for some people, but using it to lean or control a helicopter in practice just makes everything quite erratic.
id like to try it cause if i dont like it imma stay with my g100s
I find a regular mouse fine... as long as DPI is changable and clicking is easy its good for me
i dont even need changeable dpi
i just use a g100s cause i can put omron switches in it
nice 50mil clicks
The macro functionality is a ton of help for windows productivity and the location of all the buttons is really nice for gaming. the gyro and pressure sensitive buttons are kinda an afterthought for me though; but that's mostly because I also use my Wooting and getting analog from both into a game isn't easy.
There's an autohotkey script that I have, but it just identifies the controlers as they're defined in windows. so sometimes the Swiftpoint Z is first and sometimes the Wooting is; or maybe some other controller that I have plugged into the computer at the time.
Just more trouble than what it's worth to manage it.
Would be nice if the Wootility or Swiftpoint drivers could intercept controller input and remap it through their software. Sure there would be a bit of a delay, but there already is through auto hotkey anyway.
just make a wooting z
swiftpoint is on sale on their website btw
these prices on amazon are ridiculous
160 euros on swiftpoint europe, 305 us dollars on amazon is a big difference :p
that one does show up if you click on the list
?
the price
probably stock issue
people up the price instead of downing
i learned that years ago asking wtf is wrong with you to a seller on ebay
xD
a mouse over $65 baffles me
correct
a mouse is a mouse, only differences is usually materials or lower latency
and paying $50+ for that
nah
cherry baffles me too
switches i mean
gateron are nicer
and a lot cheaper
i always bought gatherons for my own kbds same for my razer i replaced all with gat blues
side buttons? what are those?
ik what they are but i dont use mice with many extra buttons usually
i prefer 3 button mice aka left, right and wheel
i don't need 14 though
people who play sc2 use their feet on the kbd
but difficult to find one with the amount i want
CREDIT: https://www.twitch.tv/zotac_cup If you have any issue with my upload(s), please email me: streamlightstv@gmail.com and I will work with you to resolv...
i desoldered the dpi switch btw
"too gamer-y"
has a amouse with tons of extra buttons
i use 1000
wtf
i have like 15x15cm of mousepad
thats awesome
its mickey mouse on a mouse on a mousepad
lol
this one actually looks cool
http://redragonusa.com/products/mousepad/P016/92
Any way I can find out the DPI of a mouse? It's some HP-Thing that I currently use, and I notice that sometimes it helps to not have 16k, and it would be nice to know what this one has, because it feels good.
Isn't having a high 16400 DPI followed by the words "High Precision" sorta contradicting itself. lol
I meant Hewlett Packard.
im so dissapointed with my anne pro dying
u turn down game sense
imo i get better results with low game sense and higher mouse dpi around 1600
i can move faster but still not skip pixels
it's not like you notice it most of the time

