wraith pond
https://www.warcraftlogs.com/reports/nCq3aJb7cG1kvRhV
New Fury Warrior main and need help.
I’m parsing well but my ilvl parse is dog 💩. What am I doing wrong? Stat allocation? Trinkets?
How do I do better on soul hunter. I have multi target raid spec from wowhead (reviewed and can’t find anything worth changing out)
Also my AOE on M+ is trash too.
vale plover
So there’s a number of things just in your opener that is a big concerning. For your opener you should be doing reck > avatar > charge > rampage > bladestorm. As you can see in the picture you did a bloodthirst and RB before you were enraged and you didn’t hit bladestorm until 12 seconds.
You also send rampage right after bladestorm finishes. With bout new s3 tier l, even last tier, we send RB until either one of two things is true. Either we’re about to lose the enrage buff OR you’ve run out of RB charges
hearty dome
alright i am lex i will try to help you :)
your opener is scuffed / wrong as my friend above me pointed out, your opener should be reck -> Avatar -> Charge (this will give you enough rage to rampage and get insta enraged) -> Rampage -> BS (bladestorm) -> spamming RB until either you run out of RB (Raging blow) stacks, are about to lose enrage / lost enrage or you reach 5 stacks of SS (Slaughtering Strikes) -> Rampage -> Roar (but truly i dont even know if pressing roar in the opener is worth it, it does about 432k dmg while RB does about 800k so it does almost double)
not making use of Brutal finish (a note in our Slayer hero tree) the note makes it so that after a BS your next Rampage does 50% inc dmg this stacks with SS stacks dmg amp on Rampage this is the reason why we want to spam RBs until one of the conditions named in the opener section is true (also overcapping is fine during the Brutal finish + SS upstacking process!) so after every BS you want to spam RBs until either you run out of RB stacks, are about to lose / lost enrage or have 5 stacks of SS.
bc you dont make no use of BF (brutal finish) your RB casts suffer which are a very big part of your dmg, just to compare i have 95 while you have 86 (we do have very similar kill times so its prdy accurate) i have 23 casts of RB per minute while you have 19.3 so i have almost 4 casts more per minute of RB which is huge if you calculate in the dmg amp it provides for Rampage as well so you are wasting one rampage cast per minute which could have done 80% inc dmg.
speaking of rampage, you are pressing it too early / too often, we wnat to press Rampage at +115 rage (though 110 is also not that bad less risk of overcapping) you have about 19 casts per minute while i have 16.9 so you have 2 casts per minute more than i do and on that kill i think i was very good on sending it at +100 / +110 ish. We want to daly our Rampage cast to min max the GCDs / casts we get of during enrage until we have to refresh it again. but also we want to delay Rampage not waste it!
you sent out way too many BTs (Blood thirst) BT does like 0 dmg has 0 synergy with anything from our kit so its useless, the only reason on why you ever want to press BT is if; You dont have ANY RB charges left, not enough rage to cast even a 80 rage Rampage, dont have execute ready or any SD procs, so BT is our last resort before we press WW, thats how useless it is.
You dont use execute correctly you either hold 2x SD (sudden death) procs for a very long time, or sent SD when the enemy has 1 stack of MfE (marked for execution) at the end of this post i will link you a WA that will light up and play a sound when the conditions under which we use Execute / SD is true and you want to press it. Execute is a rly good part of our dmg and you press it too little which results in less dmg. 100-20% hp we want to press SD when we have 2 stacks of SD or the target has +2 stacks of MfE (or are about to lose AJ (Ashen juggernaut) . this condition has the highest prio in our normal rotation. 20-0% you want to press execute / SD when the target has 1 MfE keep in mind you still dont want to overcap SD charges so if you are at 2 stacks of SD but somehow still dont have 1 MfE on the target you still want to execute / SD.
alright final verdict there are a few key points that need changing and are fundamental to both playing fury at its best and outgrowing your blue ilvl pars. i will link you both the wowhead rotation page bc its written very clearly and very simple on what to do. and also link you the WA that manages your Execute / SD. also i do have flaws and maybe i missed one thing or 2 but i think i got most of it!
I hope that i could help you out a little bit and if you have more questions dont hold back if you want you can even dm me if you feel better talking that way :)
https://www.wowhead.com/guide/classes/warrior/fury/rotation-cooldowns-pve-dps https://wago.io/r8u4tHLRQ
@wraith pond
wraith pond
Thank you guys I will brush up. I macro’d roar onto my cd so I’ll change that. Really appreciate the help.