software-support
Exhaust fan behaviour with PLA (or not PLA) in Orca start gcode
Patched firmware
Print head Crashes into Motor/Frame
Patched firmware
Official firmware
Requesting: CC1 toolhead (hotend board) bootloader backup
Cosmos Firmware
COSMOS 0.0.7 mid print stop at the same place
Cosmos Firmware
cant access usb in print menu
Cosmos Firmware
hotend fan does not turn off after bed leveling or load-unload of filament
Patched firmware
Pause for manual filament change
Cosmos Firmware
Would updating to OC 0.3.0 help my problem?
Patched firmware
Random issue while homing XY
Cosmos Firmware
Extruder fan issue
Cosmos Firmware
replacing motherboard and toolhead board after bricking printer
Patched firmware
Official firmware
Cosmos Firmware
New Motherboard Version does not appear to be compatible with Cosmos.
Cosmos Firmware
Cc multiple issues
Official firmware
CC Powered off during print, stuck at boot screen.
Patched firmware
Patched Firmware Not Installing
Patched firmware
Revert from Cosmos to OC stuck on bootlogo
Patched firmware
Can't connect to printer remotely
Cosmos Firmware
Install restart stuck on boot
Patched firmware
Help with extrude and retract macros
Cosmos Firmware
Uninstall OpenCentauri
Patched firmware
Official firmware
canvas
Patched firmware
Layer gaps...
Patched firmware
SCREWS_TILT_CALCULATE
Patched firmware
How to upgrade from patched to cosmos fw
Patched firmware
Cosmos Firmware
Nearly crashed on print while unloading on pause
Cosmos Firmware
Initial Calibration Problem
Patched firmware
OTA Update Stuck on bootload
Official firmware
Stuck on boot after install
Patched firmware
Error MCU Timer too close
Cosmos Firmware
Tool head board with klipper back to stock firmware
Patched firmware
Seems to be stuck on update screen
Patched firmware
OPEN CENTAUIR COSMOS ISSUE
Cosmos Firmware
Newbe question
Official firmware
Timer too close when launching a print
Cosmos Firmware
Big Goofed with Canvas...?
Patched firmware
Copying to Local Drive Seems Stuck at 0%
Cosmos Firmware
Can't Uninstall
Patched firmware
Will there be a COSMOS release for CANVAS?
Patched firmware
Cosmos Firmware
CC1 in version 1.1.29 error 502
Official firmware
eMMC dump
Patched firmware
Official firmware
How to get back to opencentauri.cc
Patched firmware
Cosmos Firmware
Changing printhead USB ID? (CC1)
Patched firmware
Official firmware
Cosmos Firmware
Web UI issue
Patched firmware
Official firmware
CC1 stuck in bootloop after sudden power off
What will I break if I change the hostname?
Cannot Install/uninstall OC, network device manager page/panel not responding.
Brick printer after firmware revert in COSMOS
CC stopped boot at open centauri
I want to delete failed object during midprint
It just stuck on this