#Building object alignment off by 7.5 degrees, after hours of play

1 messages · Page 1 of 1 (latest)

hazy fjord
#

This isn't an issue with the alignment steps.
Problem. I built a little house, a few outbuildings, and some walls, Got my crew, repaired the ship. Now I went to add on the Shipwright's workshop and everything I try to place down is 7.5 degrees off. Nothing I do seems to snap this back.

In this picture... you can see my wall is not snapping (I turned snapping on and off).
You can see the 7.5 degree misalignment. I can't line anything up with structures in the world either.

PC, 9800x3d,5070ti, 64GB, M4 SSD.

image.png
languid dust
#

Did you try changing the angle with "L"?

hazy fjord
#

Yes. 15degrees is the smallest angle. This is half that smallest angle we can set.

languid dust
#

Can you get it straight so it lines up with the direction the planks?

hazy fjord
#

No. The foundations you see were put down a while ago (before this alignment issue appeared). It's universal. Anything new I try and put down is off by 7.5 degrees.

languid dust
#

Quit and rejoin doesn't work?

hazy fjord
#

Nothing will snap to the old buildings (because they can't align). I've checked every setting (snapping included). It's off in the world too. You can align any buildings to Ruins

#

No... I've been in and out.

languid dust
#

You should add your save files to this post so the devs can check it out when they can

hazy fjord
#

Thanks. Will do.

#

It's... fixed. What I did. Change to 90D, rotate, change to 45D and so on. When I switched back to 15D it worked just fine. It got locked into 30D as the lowest setting. Shifting though each setting seemed to 'reset' it. Thanks for sticking it out with me. Now Iknow what to do if this happens again!