#[SOLVED] Move exceeds maximum extrusion

1 messages · Page 1 of 1 (latest)

loud tinsel
#

<@&1304550334839918672>

sacred shard
#

I have mine at like 4000

loud tinsel
#

oh okay

#

is the cross section at 5 okay?

sacred shard
#

If you were to do a lane move over 400 you would likely also get the error.

loud tinsel
#

i might be on that edge then and this large model pushed the limits then

#

okay so i will up the 400 to 4000. any of the other ones stick out as to low?

sacred shard
#

This almost seems like something else though

#

Its referencing the cross section, I dont believe I even have a definition for this value.

#

One sec.

loud tinsel
#

I saw in the discord history that thunderkeys and others have it at 5. I had it at 5 for awhile now

#

i will remove it if its not necessary

sacred shard
#

What size nozzle are you running

loud tinsel
#

.4

#

whats weird is ive done longer prints already. this was only on layer 19 and 6 changes

sacred shard
#

Any different settings when you sliced than you would normally use?

loud tinsel
#

nope i actually did the same one but less of the models last night. But ive done this amount once before

#

something seems off with my lanes. Im gonna go investigate why lane 4 is not homed. maybe thats why? but it was retracting lane 2

sacred shard
#

Was lane 2 fully back past the hub ?

loud tinsel
#

lane 4 was backed out of the extruder i havent had that in weeks now

#

brb gonna go check lane 2

#

lane 2 is barely out of the toolhead

sacred shard
#

So this was trigered by lane 2's fast move

#

Or possibly the unload

#

How far out of the tool does it normally unload?

loud tinsel
#

looks to be either right when it started it

#

like 20mm above the top of the toolhead

sacred shard
#

Can you send the gcode?

#

I cant figure out why it would ask for 115mm2 of extrusion

loud tinsel
#

yeah how exactly do i send that? just the sliced file?

#

never had to lol

sacred shard
#

Yeah

loud tinsel
#

okay one sec

modern hare
#

Just one turtle in the print?

loud tinsel
#

18 of them

modern hare
#

You didn’t cancel one did you?

loud tinsel
#

oh you know what i did cancel 3 due the model lifting off the build plate

sacred shard
#

Oop

#

There it is.

loud tinsel
#

ahhhh

#

so is that a no no

sacred shard
#

exclude object and AFC are not compatible.

loud tinsel
#

okay so never do it. is there a work around for a situation like that?

#

or hope it survives

modern hare
#

Not really the issue is that slicer doesn’t do filament changes outside of the object so it will likely mess things up even outside of this error

loud tinsel
#

oh okay so the afc doesnt know its gone basically and klipper extrudes the req amount or something along that line right?

#

Im on the AT site right now and dont see anything about that. Might be a good thing for the troubleshooting section IMO about not doing that

#

so max_extrude_only_distance: 4000 is fine to leave right? or make it back to 400

modern hare
#

400 should work really afaik

#

And huh I swore we added something about that

loud tinsel
#

okay i will keep it at 400 as it worked before no issues

#

i searched exclude and nothing pops up. maybe its a photo on a page

#

[SOLVED] Move exceeds maximum extrusion

modern hare
#

It’s on the to-do list it seems

loud tinsel
#

Gotcha 👍