Can Bridge mode | ArmoredTurtle 3D | Page 1

ivory berry Apr 26, 2025, 10:30 PM

#

i have up and running 2.4 octopus in bridge mode and a ebb36 running fine how should i add the afc lite to the can ? can i just join the wires at the Rj connector or do i need to add it in series ? everything is built ready to flash
any help would be great

grizzled portalBOT Apr 26, 2025, 10:30 PM

#

<@&1304550334839918672>

ivory berry Apr 26, 2025, 10:31 PM

#

i do have a u2c but as i have can running which would be the best option ?

small oxide Apr 26, 2025, 10:43 PM

#

that is what I use, a u2c

fluid merlin Apr 26, 2025, 10:50 PM

#

But if you only want 1 can network and don’t use cartographer then you could use 3 position wagos to splice into the existing

ivory berry Apr 26, 2025, 10:57 PM

#

at the min im spliced the 2 wires together at the RJ11/12 plug so both wires one for the ebb and one for the afc lite.

#

should that work ?

fluid merlin Apr 26, 2025, 11:02 PM

#

It should so long as you get good crimps

ivory berry Apr 26, 2025, 11:08 PM

#

do i need the jumbers on both yes

fluid merlin Apr 26, 2025, 11:54 PM

#

you need 2 total jumpers, preferably yes on the EBB and AFC.

fluid merlin Apr 28, 2025, 1:30 AM

#

I did see today that some version of the octopus have a soldered resistor on them so there is a chance you will only need to have 1 jumper

small oxide May 25, 2025, 1:54 PM

#

is this still an issue @ivory berry ?

#Can Bridge mode