AFC_CALIBRATION not popping up GUI [SOLVED] | ArmoredTurtle 3D | Page 1

magic pollen Feb 18, 2025, 1:20 AM

#

So, I've inherited BT-025 from my brother @Garanhao | BT-025 | BT-101 and I'm going through the initial configs. I think I've got everything up and running, but when I try to do the AFC_CALIBRATION the console output looks like it's waiting for a prompt, but nothing ever comes up. I don't see any other errors on the screen, so not sure where to go from here. I've also attached the klippy.log file.

📎 logs-20250217-181837.zip

mortal patrol Feb 18, 2025, 1:48 AM

#

you need [respond] in your printer.cfg
https://docs.mainsail.xyz/overview/features/macro-prompts

Macro Prompts | Mainsail

It allows macros in Klipper to trigger dialog prompts to interact with the Firmware and will enable the user to choose between options or to close the dialog again in case it's no longer needed.

magic pollen Feb 18, 2025, 3:01 AM

#

Perfect, thank you! Somehow Mainsail was missing from my moonraker config and never got updated. After updating that, the [respond] is working properly.

karmic bear Feb 18, 2025, 5:24 AM

#

If your issue is resolved please mark title as [solved]

#AFC_CALIBRATION not popping up GUI [SOLVED]